The generic platform driver pcie-designware-plat.c doesn't work for UniPhier PCIe host controller, because the controller has some necessary initialization sequence for the controller-specific logic. Currently the controller doesn't use "snps,dw-pcie" compatible, so this is no longer needed. Remove the compatible string from the pcie node. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 0d75a90d1342..e24784e12b7b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -896,7 +896,7 @@ usb_ssphy1: ss-phy@310 { }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index f49a8db3e918..6277be04a974 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -873,7 +873,7 @@ usb1_ssphy0: ss-phy@300 { }; pcie: pcie@66000000 { - compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + compatible = "socionext,uniphier-pcie"; status = "disabled"; reg-names = "dbi", "link", "config"; reg = <0x66000000 0x1000>, <0x66010000 0x10000>, -- 2.25.1