The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
some resources from port 2's PHY and HCI IP. In particular the PMU clock
for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
register of port 2. To allow each USB port to be controlled
independently of port 2, we need a handle to that particular PMU clock
in the *PHY* node, as the HCI and PHY part might be handled by separate
drivers.
Add that clock to the requirements of the H616 PHY binding, so that a
PHY driver can apply the quirk in isolation, without requiring help from
port 2's HCI driver.
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
.../phy/allwinner,sun8i-h3-usb-phy.yaml | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
index e288450e0844..3a3168392597 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -36,18 +36,22 @@ properties:
- const: pmu3
clocks:
+ minItems: 4
items:
- description: USB OTG PHY bus clock
- description: USB Host 0 PHY bus clock
- description: USB Host 1 PHY bus clock
- description: USB Host 2 PHY bus clock
+ - description: PMU clock for host port 2
clock-names:
+ minItems: 4
items:
- const: usb0_phy
- const: usb1_phy
- const: usb2_phy
- const: usb3_phy
+ - const: pmu2_clk
resets:
items:
@@ -98,6 +102,21 @@ required:
additionalProperties: false
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - sun50i-h616-usb-phy
+
+then:
+ properties:
+ clocks:
+ minItems: 5
+
+ clock-names:
+ minItems: 5
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
--
2.35.3
