The mem_ctl_info.scrub_cap field is supposed to be set with the ECC
scrub-related flags while the driver initializes it with the SCRUB_HW_SRC
flag ID. It's definitely wrong, though hasn't caused any problem since the
structure field isn't used by the EDAC core. Let's fix it anyway by using
the SCRUB_FLAG_HW_SRC macro to initialize the field.
Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller")
Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
---
drivers/edac/synopsys_edac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 17960f7ca29b..c6f3b383e5ff 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -858,7 +858,7 @@ static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
/* Initialize controller capabilities and configuration */
mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
- mci->scrub_cap = SCRUB_HW_SRC;
+ mci->scrub_cap = SCRUB_FLAG_HW_SRC;
mci->scrub_mode = SCRUB_NONE;
mci->edac_cap = EDAC_FLAG_SECDED;
--
2.37.2
