On 19/08/2022 22:26, Anjelique Melendez wrote:
>
>
> On 7/26/2022 3:27 AM, Krzysztof Kozlowski wrote:
>> On 25/07/2022 21:13, Anjelique Melendez wrote:
>>> Add support for the new "qcom,pmk8350-pon" comptaible string.
>>>
>>> Signed-off-by: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
>>> ---
>>> drivers/power/reset/qcom-pon.c | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
>>> index 4a688741a88a..16bc01738be9 100644
>>> --- a/drivers/power/reset/qcom-pon.c
>>> +++ b/drivers/power/reset/qcom-pon.c
>>> @@ -82,6 +82,7 @@ static const struct of_device_id pm8916_pon_id_table[] = {
>>> { .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT },
>>> { .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT },
>>> { .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT },
>>> + { .compatible = "qcom,pmk8350-pon", .data = (void *)GEN2_REASON_SHIFT },
>>> { }
>>> };
>>> MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
>>
>> This is now confusing. The new device has entirely different first and
>> second IO address spaces, but you do not code here any differences.
>>
>
> Based on previous responses to this patch series, it was decided that a new
> "qcom,pmk8350-pon" compatible string is needed to differentiate between gen1/gen2
> vs gen3 children pon devices. Currently the child handles obtaining the register
> address(es) from its parent's regmap in drivers/input/misc/pm8941-pwrkey.c
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/input/misc/pm8941-pwrkey.c?h=v6.0-rc1#n287).
> The patch that handled that change can be found at
> https://lore.kernel.org/linux-arm-msm/20220422191239.6271-4-quic_amelende@xxxxxxxxxxx/.
>
> This driver, as the parent, does not actually need any changes besides adding the
> new parent compatible string. Specifically this driver handles reboot mode support.
> Everything needed to handle reboot mode is in the first register and reboot mode
> is handled the same as a "qcom,pm8998-pon" parent. The split of the pon register
> in pmk8350 does not affect reboot mode. This is why before we added a new compatible
> string "qcom,pm8998-pon" still worked for gen3 children devices. Even though 2
> registers could be defined in the device tree, as a 2nd register is optional for gen3
> children devices,the fact that this driver uses of_property_read_u32() will ensure that
> the base address used for reboot mode comes from the first register.
>
Ah, makes sense.
Best regards,
Krzysztof
