>On 02/09/2022 21:22, Jerry Ray wrote:
>> The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
>> evaluating many Microchip ethernet switch and PHY products. Various
>> daughter cards can connect up via an RGMII connector or an RMII connector.
>>
>> The EDS board is not intended for stand-alone use and has no ethernet
>> capabilities when no daughter board is connected. As such, this
>> device tree is intended to be used with a DT overlay defining the add-on board.
>> To better ensure consistency, some items are defined here as a form of
>> documentation so that all add-on overlays will use the same terms.
>>
>> Google search keywords: "Microchip SAMA5D3-EDS"
>>
>> Signed-off-by: Jerry Ray <jerry.ray@xxxxxxxxxxxxx>
>> ---
>> v5->v6:
>> - Replaced underscores in names where I can, improving naming.
>> v4->v5:
>> - patch now applies to v6.0-rc2
>> v3->v4:
>> - Fixed regulators as necessary to get the board to boot from SD Card.
>> v2->v3:
>> - Alphabetized pinctrl entries.
>> - cleaned up a warning in the regulators section.
>> - License tweaked to 'OR MIT'
>> - Included Makefile change
>> v1->v2:
>> - Modified the compatible field in the device tree to reflect Microchip
>> Ethernet Development System Board.
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/at91-sama5d3_eds.dts | 309
>> +++++++++++++++++++++++++
>> 2 files changed, 310 insertions(+)
>> create mode 100644 arch/arm/boot/dts/at91-sama5d3_eds.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 05d8aef6e5d2..e92e639a2dc3 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -61,6 +61,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
>> at91-sama5d2_icp.dtb \
>> at91-sama5d2_ptc_ek.dtb \
>> at91-sama5d2_xplained.dtb \
>> + at91-sama5d3_eds.dtb \
>> at91-sama5d3_ksz9477_evb.dtb \
>> at91-sama5d3_xplained.dtb \
>> at91-dvk_som60.dtb \
>> diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts
>> b/arch/arm/boot/dts/at91-sama5d3_eds.dts
>> new file mode 100644
>> index 000000000000..b4fe1c5f2997
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts
>> @@ -0,0 +1,309 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR MIT
>> +/*
>> + * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
>> + * Development System board.
>> + *
>> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Jerry Ray <jerry.ray@xxxxxxxxxxxxx> */ /dts-v1/; #include
>> +"sama5d36.dtsi"
>> +
>> +/ {
>> + model = "SAMA5D3 Ethernet Development System";
>> + compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
>> + "atmel,sama5d3", "atmel,sama5";
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + clocks {
>> + slow_xtal {
>
>No underscores in node names. Override by label.
>
>> + clock-frequency = <32768>;
>> + };
>> +
>> + main_xtal {
>> + clock-frequency = <12000000>;
>> + };
>> + };
>> +
>> + gpio {
>> + compatible = "gpio-keys";
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_key_gpio>;
>> +
>> + button-3 {
>> + label = "PB_USER";
>> + gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
>> + linux,code = <0x104>;
>> + wakeup-source;
>> + };
>> + };
>> +
>> + memory@20000000 {
>> + reg = <0x20000000 0x10000000>;
>> + };
>> +
>> + vcc_3v3_reg: buck-regulator-1 {
>
>Keep consistent prefix or suffix, so:
>regulator-buck-1
>
>> + compatible = "regulator-fixed";
>> + regulator-name = "VCC_3V3";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-always-on;
>> + };
>> +
>> + vcc_2v5_reg: ldo-regulator-2 {
>
>regulator-ldo-1
>(why numbering of LDO regulators starts from 2? keep some sense in this)
>
>
There are N regulators on the board, so they are numbered 1 thru N.
Regulator 2 is regulator 2 whether it's a buck or LDO.
>> + compatible = "regulator-fixed";
>> + regulator-name = "VCC_2V5";
>> + regulator-min-microvolt = <2500000>;
>> + regulator-max-microvolt = <2500000>;
>> + regulator-always-on;
>> + vin-supply = <&vcc_3v3_reg>;
>> + };
>> +
>> + vcc_1v8_reg: ldo-regulator-3 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "VCC_1V8";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + vin-supply = <&vcc_3v3_reg>;
>> + };
>> +
>> + vcc_1v2_reg: buck-regulator-4 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "VCC_1V2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + };
>> +
>> + vcc_mmc0_reg: fixedregulator-mmc0 {
>
>Just regulator-mmc0
>
Okay.
>> + compatible = "regulator-fixed";
>> + regulator-name = "mmc0-card-supply";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-always-on;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
>> + gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
>> + };
>
>
>Best regards,
>Krzysztof
>
Regards,
Jerry.
