[PATCH 2/3] ARM: dts: qcom: use generic node name "gpio" in SPMI PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



GPIO controller nodes are named by convention just "gpio", not "gpios".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-pm8941.dtsi  | 2 +-
 arch/arm/boot/dts/qcom-pma8084.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 9cd49deb9fa7..1ac477878c67 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -59,7 +59,7 @@ smbb: charger@1000 {
 			chg_otg: otg-vbus { };
 		};
 
-		pm8941_gpios: gpios@c000 {
+		pm8941_gpios: gpio@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e77602e9f95c..0da6c1a5d547 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@ pwrkey@800 {
 			bias-pull-up;
 		};
 
-		pma8084_gpios: gpios@c000 {
+		pma8084_gpios: gpio@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux