Edge Compute Module 0 Carrier is an industrial form factor evaluation
board from Edgeble AI.
General features:
- microSD slot
- 2x MIPI CSI2 connectors
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion
Edge Compute Module 0 needs to mount on top of this Carrier board for
creating Edge Compute Module 0 Carrier platform.
Add support for it.
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxx>
---
Changes for v4:
- rebase on -next
Changes for v3:
- none
Changes for v2:
- change easy and meaningful dts name
arch/arm/boot/dts/Makefile | 1 +
.../boot/dts/rv1126-edgeble-ecm0-carrier.dts | 38 +++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 05d8aef6e5d2..69781a7227cb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1114,6 +1114,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rv1108-elgin-r1.dtb \
rv1108-evb.dtb \
+ rv1126-edgeble-ecm0-carrier.dtb \
rk3036-evb.dtb \
rk3036-kylin.dtb \
rk3066a-bqcurie2.dtb \
diff --git a/arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts b/arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts
new file mode 100644
index 000000000000..150bfb9bd04a
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-ecm0-carrier.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-edge-compute-module-0.dtsi"
+
+/ {
+ model = "Edgeble AI Edge Compute Module 0 Carrier board";
+ compatible = "edgeble,edge-compute-module-0-carrier",
+ "edgeble,edge-compute-module-0", "rockchip,rv1126";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+ rockchip,default-sample-phase = <90>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.25.1
