Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@xxxxxxxxxx>
---
V4 -> v3:
- Simplify the fix by not removing the local num variable (it is removed as
part of a later commit).
drivers/hwmon/mr75203.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 8adfbb15453f..0ead576694a1 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -594,7 +594,12 @@ static int mr75203_probe(struct platform_device *pdev)
ret = device_property_read_u8_array(dev, "intel,vm-map",
pvt->vm_idx, vm_num);
if (ret) {
- num = 0;
+ /*
+ * Incase intel,vm-map property is not defined, we
+ * assume incremental channel numbers.
+ */
+ for (i = 0; i < vm_num; i++)
+ pvt->vm_idx[i] = i;
} else {
for (i = 0; i < vm_num; i++)
if (pvt->vm_idx[i] >= vm_num ||
@@ -604,13 +609,6 @@ static int mr75203_probe(struct platform_device *pdev)
}
}
- /*
- * Incase intel,vm-map property is not defined, we assume
- * incremental channel numbers.
- */
- for (i = num; i < vm_num; i++)
- pvt->vm_idx[i] = i;
-
in_config = devm_kcalloc(dev, num + 1,
sizeof(*in_config), GFP_KERNEL);
if (!in_config)
--
2.37.1
