From: Tao Ren <rentao.bupt@xxxxxxxxx>
Enable mac3 controller in Elbert dts: Elbert MAC3 is connected to the
onboard switch directly (fixed link).
Signed-off-by: Tao Ren <rentao.bupt@xxxxxxxxx>
---
arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
index 27b43fe099f1..52cb617783ac 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -183,3 +183,14 @@ imux31: i2c@7 {
&i2c11 {
status = "okay";
};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--
2.30.2
