Hi, This is a refresh of previous patches sent to enable GPU Devfreq on H6 Beelink GS1 but that wasn't stable at that time[0]. With the recent fix on GPU PLL from Roman Stratiienko I have retested and everything seems stable and works as expected[1]. Regards, Clement 0: https://lore.kernel.org/lkml/CAJiuCce58Gaxf_Qg2cnMwvOgUqYU__eKb3MDX1Fe_+47htg2bA@xxxxxxxxxxxxxx/ 1: https://lore.kernel.org/linux-arm-kernel/2562485.k3LOHGUjKi@kista/T/ Changes since v2: - Fixes device-tree warnings - Add panfrost fix to enable regulator - Remove always-on regulator from device-tree - Update cooling map from vendor kernel Clément Péron (5): arm64: defconfig: Enable devfreq cooling device arm64: dts: allwinner: h6: Add cooling map for GPU arm64: dts: allwinner: h6: Add GPU OPP table drm/panfrost: devfreq: set opp to the recommended one to configure and enable regulator arm64: dts: allwinner: beelink-gs1: Enable GPU OPP .../dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 + .../boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi | 87 +++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 51 ++++++++++- arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/panfrost/panfrost_devfreq.c | 8 ++ 5 files changed, 146 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi -- 2.34.1
