Re: [PATCH v4 2/3] cap11xx: Add support for various cap11xx devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Oh good catch! Will resubmitted with v5.

On Tue, Oct 7, 2014 at 5:09 PM, Dmitry Torokhov
<dmitry.torokhov@xxxxxxxxx> wrote:
> Hi Matt,
>
> On Mon, Sep 29, 2014 at 09:26:28PM -0700, Matt Ranostay wrote:
>> +     priv->num_channels = cap->num_channels;
>> +     priv->keycodes = devm_kcalloc(dev,
>> +             priv->num_channels, sizeof(u32), GFP_KERNEL);
>> +     if (!priv->keycodes)
>> +             return -ENOMEM;
>
> Instead of allocating keymap separately can we do something like below?
>
> Thanks.
>
> --
> Dmitry
>
>
> Input: cap11xx - add support for various cap11xx devices
>
> From: Matt Ranostay <mranostay@xxxxxxxxx>
>
> Several other variants of the cap11xx device exists with a varying
> number of capacitance detection channels. Add support for creating
> the channels dynamically.
>
> Signed-off-by: Matt Ranostay <mranostay@xxxxxxxxx>
> Reviewed-by: Daniel Mack <daniel@xxxxxxxxxx>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  .../devicetree/bindings/input/cap11xx.txt          |    3 +
>  drivers/input/keyboard/cap11xx.c                   |   62 +++++++++++++-------
>  2 files changed, 42 insertions(+), 23 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
> index 738f5f3..8031aa5 100644
> --- a/Documentation/devicetree/bindings/input/cap11xx.txt
> +++ b/Documentation/devicetree/bindings/input/cap11xx.txt
> @@ -7,9 +7,10 @@ Required properties:
>
>         compatible:             Must be on the following, depending on the model:
>                                         "microchip,cap1106"
> +                                       "microchip,cap1126"
> +                                       "microchip,cap1188"
>
>         reg:                    The I2C slave address of the device.
> -                               Only 0x28 is valid.
>
>         interrupts:             Property describing the interrupt line the
>                                 device's ALERT#/CM_IRQ# pin is connected to.
> diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
> index 0da2e83..87fa209 100644
> --- a/drivers/input/keyboard/cap11xx.c
> +++ b/drivers/input/keyboard/cap11xx.c
> @@ -1,7 +1,6 @@
>  /*
>   * Input driver for Microchip CAP11xx based capacitive touch sensors
>   *
> - *
>   * (c) 2014 Daniel Mack <linux@xxxxxxxxxx>
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -54,8 +53,6 @@
>  #define CAP11XX_REG_MANUFACTURER_ID    0xfe
>  #define CAP11XX_REG_REVISION           0xff
>
> -#define CAP11XX_NUM_CHN 6
> -#define CAP11XX_PRODUCT_ID     0x55
>  #define CAP11XX_MANUFACTURER_ID        0x5d
>
>  struct cap11xx_priv {
> @@ -63,7 +60,24 @@ struct cap11xx_priv {
>         struct input_dev *idev;
>
>         /* config */
> -       unsigned short keycodes[CAP11XX_NUM_CHN];
> +       u32 keycodes[];
> +};
> +
> +struct cap11xx_hw_model {
> +       uint8_t product_id;
> +       unsigned int num_channels;
> +};
> +
> +enum {
> +       CAP1106,
> +       CAP1126,
> +       CAP1188,
> +};
> +
> +static const struct cap11xx_hw_model cap11xx_devices[] = {
> +       [CAP1106] = { .product_id = 0x55, .num_channels = 6 },
> +       [CAP1126] = { .product_id = 0x53, .num_channels = 6 },
> +       [CAP1188] = { .product_id = 0x50, .num_channels = 8 },
>  };
>
>  static const struct reg_default cap11xx_reg_defaults[] = {
> @@ -150,7 +164,7 @@ static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
>         if (ret < 0)
>                 goto out;
>
> -       for (i = 0; i < CAP11XX_NUM_CHN; i++)
> +       for (i = 0; i < priv->idev->keycodemax; i++)
>                 input_report_key(priv->idev, priv->keycodes[i],
>                                  status & (1 << i));
>
> @@ -187,11 +201,16 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>         struct device *dev = &i2c_client->dev;
>         struct cap11xx_priv *priv;
>         struct device_node *node;
> +       const struct cap11xx_hw_model *cap = &cap11xx_devices[id->driver_data];
>         int i, error, irq, gain = 0;
>         unsigned int val, rev;
> -       u32 gain32, keycodes[CAP11XX_NUM_CHN];
> +       u32 gain32;
> +
> +       BUG_ON(!cap->num_channels);
>
> -       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       priv = devm_kzalloc(dev,
> +                           sizeof(*priv) + cap->num_channels * sizeof(u32),
> +                           GFP_KERNEL);
>         if (!priv)
>                 return -ENOMEM;
>
> @@ -203,9 +222,9 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>         if (error)
>                 return error;
>
> -       if (val != CAP11XX_PRODUCT_ID) {
> +       if (val != cap->product_id) {
>                 dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
> -                       val, CAP11XX_PRODUCT_ID);
> +                       val, cap->product_id);
>                 return -ENODEV;
>         }
>
> @@ -225,8 +244,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>
>         dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
>         i2c_set_clientdata(i2c_client, priv);
> -       node = dev->of_node;
>
> +       node = dev->of_node;
>         if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
>                 if (is_power_of_2(gain32) && gain32 <= 8)
>                         gain = ilog2(gain32);
> @@ -234,17 +253,12 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>                         dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
>         }
>
> -       BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
> -
>         /* Provide some useful defaults */
> -       for (i = 0; i < ARRAY_SIZE(keycodes); i++)
> -               keycodes[i] = KEY_A + i;
> +       for (i = 0; i < cap->num_channels; i++)
> +               priv->keycodes[i] = KEY_A + i;
>
>         of_property_read_u32_array(node, "linux,keycodes",
> -                                  keycodes, ARRAY_SIZE(keycodes));
> -
> -       for (i = 0; i < ARRAY_SIZE(keycodes); i++)
> -               priv->keycodes[i] = keycodes[i];
> +               priv->keycodes, cap->num_channels);
>
>         error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
>                                    CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
> @@ -268,17 +282,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>         if (of_property_read_bool(node, "autorepeat"))
>                 __set_bit(EV_REP, priv->idev->evbit);
>
> -       for (i = 0; i < CAP11XX_NUM_CHN; i++)
> +       for (i = 0; i < cap->num_channels; i++)
>                 __set_bit(priv->keycodes[i], priv->idev->keybit);
>
>         __clear_bit(KEY_RESERVED, priv->idev->keybit);
>
>         priv->idev->keycode = priv->keycodes;
>         priv->idev->keycodesize = sizeof(priv->keycodes[0]);
> -       priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes);
> +       priv->idev->keycodemax = cap->num_channels;
>
>         priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
> -       priv->idev->id.product = CAP11XX_PRODUCT_ID;
> +       priv->idev->id.product = cap->product_id;
>         priv->idev->id.version = rev;
>
>         priv->idev->open = cap11xx_input_open;
> @@ -312,12 +326,16 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
>
>  static const struct of_device_id cap11xx_dt_ids[] = {
>         { .compatible = "microchip,cap1106", },
> +       { .compatible = "microchip,cap1126", },
> +       { .compatible = "microchip,cap1188", },
>         {}
>  };
>  MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
>
>  static const struct i2c_device_id cap11xx_i2c_ids[] = {
> -       { "cap1106", 0 },
> +       { "cap1106", CAP1106 },
> +       { "cap1126", CAP1126 },
> +       { "cap1188", CAP1188 },
>         {}
>  };
>  MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux