Since reading value of PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL was
0x00000000 on one of SoCs (R-Car S4-8), it cannot find the eDMA.
So, directly read the eDMA register if edma.red_base is not zero.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-designware.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 72f9620a374d..08f91a6bbe4b 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -844,8 +844,7 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
{
u32 val;
- val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
- if (val == 0xFFFFFFFF && pci->edma.reg_base) {
+ if (pci->edma.reg_base) {
pci->edma.mf = EDMA_MF_EDMA_UNROLL;
val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
@@ -853,6 +852,7 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
pci->edma.mf = EDMA_MF_EDMA_LEGACY;
pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE;
+ val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
} else {
return -ENODEV;
}
--
2.25.1
