On Wed, Aug 24, 2022 at 05:36:54PM -0500, Li Yang wrote:
> After the binding has been updated to include more specific interrupt
> definition, update the dts to use the more specific interrupt names.
>
> Signed-off-by: Po Liu <po.liu@xxxxxxx>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++---------
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> index 3ba66b18de35..242fe8bfab17 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> @@ -883,9 +883,9 @@ pcie1: pcie@3400000 {
> reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
> <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 118 0x4>, /* controller interrupt */
> - <0 117 0x4>; /* PME interrupt */
> - interrupt-names = "intr", "pme";
> + interrupts = <0 117 0x4>,
> + <0 118 0x4>;
While at it, could you use IRQ_TYPE_LEVEL_HIGH for the polarity cell?
Shawn
> + interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> @@ -909,9 +909,9 @@ pcie2: pcie@3500000 {
> reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
> <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 128 0x4>,
> - <0 127 0x4>;
> - interrupt-names = "intr", "pme";
> + interrupts = <0 127 0x4>,
> + <0 128 0x4>;
> + interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> @@ -935,9 +935,9 @@ pcie3: pcie@3600000 {
> reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
> <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
> reg-names = "regs", "config";
> - interrupts = <0 162 0x4>,
> - <0 161 0x4>;
> - interrupt-names = "intr", "pme";
> + interrupts = <0 161 0x4>,
> + <0 162 0x4>;
> + interrupt-names = "pme", "aer";
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> --
> 2.37.1
>
