On Mon, Aug 22, 2022 at 02:45:28PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@xxxxxxx> > > V5: > Add R-b for dt-bindings > Tune order of vpu blk ctrl node per unit address > Update commit log of patch 5. > - Per HRV, this should be detailed explained in HDMI HRV driver, so here > I only say HRV_MWR(HDMI RX Video Memory Write Master for RX validation). > > V4: > Add R-b for patch 2 > Add a new patch 3 to introduce interconnect property for i.MX8MM VPU blk ctrl, > same to other properties, i.MX8MM/P could use their own names in patch 4 > > V3: > Per DT maitainer, add a new patch to clean up minItems, see patch 2 > > V2: > - Add A-b from DT maintainer for patch 1 > - Per DT maintainer, I added description for items. To > make it consistent, I also added description to i.MX8MM. > - Per Adam, change VPU H1/h1 to VC8000E/vc8000e in the patchset. > > This patchset is to add more blk ctrl support for i.MX8MP > - Add HDMI HDCP/HRV BLK CTRL support > - Add VPU BLK CTRL support > - Add PGC VPU node which supplies power domain for VPU BLK > > Peng Fan (8): > dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV > dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl > dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk > ctrl > dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl > soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR > soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl > arm64: dts: imx8mp: add vpu pgc nodes > arm64: dts: imx8mp: add VPU blk ctrl node Applied all, thanks!
