Robert Marko <robert.marko@xxxxxxxxxx> writes: > On Tue, Aug 30, 2022 at 9:42 AM Gregory CLEMENT > <gregory.clement@xxxxxxxxxxx> wrote: >> >> Robert Marko <robert.marko@xxxxxxxxxx> writes: >> >> > On Mon, May 16, 2022 at 2:48 PM Robert Marko <robert.marko@xxxxxxxxxx> wrote: >> >> >> >> Methode eDPU is an Armada 3720 powered board based on the Methode uDPU. >> >> >> >> They feature the same CPU, RAM, and storage as well as the form factor. >> >> >> >> However, eDPU only has one SFP slot plus a copper G.hn port. >> >> >> >> Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx> >> >> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> >> >> --- >> >> Changes in v2: >> >> * Make the DTS split a separate commit >> >> --- >> >> arch/arm64/boot/dts/marvell/Makefile | 1 + >> >> arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts | 14 ++++++++++++++ >> >> 2 files changed, 15 insertions(+) >> >> create mode 100644 arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts >> >> >> >> diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile >> >> index 1c794cdcb8e6..104d7d7e8215 100644 >> >> --- a/arch/arm64/boot/dts/marvell/Makefile >> >> +++ b/arch/arm64/boot/dts/marvell/Makefile >> >> @@ -1,6 +1,7 @@ >> >> # SPDX-License-Identifier: GPL-2.0 >> >> # Mvebu SoC Family >> >> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb >> >> +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb >> >> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb >> >> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb >> >> dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb >> >> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts >> >> new file mode 100644 >> >> index 000000000000..57fc698e55d0 >> >> --- /dev/null >> >> +++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts >> >> @@ -0,0 +1,14 @@ >> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> >> + >> >> +/dts-v1/; >> >> + >> >> +#include "armada-3720-uDPU.dtsi" >> >> + >> >> +/ { >> >> + model = "Methode eDPU Board"; >> >> + compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; >> >> +}; >> >> + >> >> +ð0 { >> >> + phy-mode = "2500base-x"; >> >> +}; >> >> -- >> >> 2.36.1 >> >> >> > >> > Hi Gregory, >> Hello Roberto, >> >> > Is there something else that I can improve in the series? >> >> Sorry for having missed this series. At first view it seems OK, I am >> going to have a closer look this week. > > Thanks, that sounds good. Hello, could you send again patch 8, I managed to apply all the other ones excepting this one. Thanks, Gregory > > Regards, > Robert >> >> Gregory >> >> >> > >> > Regards, >> > Robert >> > >> > -- >> > Robert Marko >> > Staff Embedded Linux Engineer >> > Sartura Ltd. >> > Lendavska ulica 16a >> > 10000 Zagreb, Croatia >> > Email: robert.marko@xxxxxxxxxx >> > Web: www.sartura.hr >> >> -- >> Gregory Clement, Bootlin >> Embedded Linux and Kernel engineering >> http://bootlin.com > > > > -- > Robert Marko > Staff Embedded Linux Engineer > Sartura Ltd. > Lendavska ulica 16a > 10000 Zagreb, Croatia > Email: robert.marko@xxxxxxxxxx > Web: www.sartura.hr -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com