Re: [PATCH v6 1/7] dt-binding: phy: Add iMX8MP PCIe PHY binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, dem 01.09.2022 um 12:02 +0800 schrieb Richard Zhu:
> Add i.MX8MP PCIe PHY binding.
> On iMX8MM, the initialized default value of PERST bit(BIT3) of
> SRC_PCIEPHY_RCR is 1b'1.
> But i.MX8MP has one inversed default value 1b'0 of PERST bit.
> 
> And the PERST bit should be kept 1b'1 after power and clocks are stable.
> So add one more PERST explicitly for i.MX8MP PCIe PHY.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> Tested-by: Marek Vasut <marex@xxxxxxx>
> Tested-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>
> Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>

Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>

> ---
>  .../bindings/phy/fsl,imx8-pcie-phy.yaml          | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> index b6421eedece3..692783c7fd69 100644
> --- a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> @@ -16,6 +16,7 @@ properties:
>    compatible:
>      enum:
>        - fsl,imx8mm-pcie-phy
> +      - fsl,imx8mp-pcie-phy
>  
>    reg:
>      maxItems: 1
> @@ -28,11 +29,16 @@ properties:
>        - const: ref
>  
>    resets:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
>  
>    reset-names:
> -    items:
> -      - const: pciephy
> +    oneOf:
> +      - items:          # for iMX8MM
> +          - const: pciephy
> +      - items:          # for IMX8MP
> +          - const: pciephy
> +          - const: perst
>  
>    fsl,refclk-pad-mode:
>      description: |
> @@ -60,6 +66,10 @@ properties:
>      description: A boolean property indicating the CLKREQ# signal is
>        not supported in the board design (optional)
>  
> +  power-domains:
> +    description: PCIe PHY  power domain (optional).
> +    maxItems: 1
> +
>  required:
>    - "#phy-cells"
>    - compatible





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux