Some implementations of the TSE have their PCS as an external bloc, exposed at its own register range. Document this, and add a new example showing a case using the pcs and the new phylink conversion to connect an sfp port to a TSE mac. Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx> --- V3->V4 : - No changes V2->V3 : - Fixed construct of reg/reg-names - Fixed example to use an all-zero mac-addr V1->V2 : - Fixed example .../devicetree/bindings/net/altr,tse.yaml | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml index 78c7a2047910..8d1d94494349 100644 --- a/Documentation/devicetree/bindings/net/altr,tse.yaml +++ b/Documentation/devicetree/bindings/net/altr,tse.yaml @@ -95,7 +95,9 @@ allOf: properties: reg: minItems: 6 + maxItems: 7 reg-names: + minItems: 6 items: - const: control_port - const: rx_csr @@ -103,10 +105,35 @@ allOf: - const: rx_resp - const: tx_csr - const: tx_desc + - const: pcs unevaluatedProperties: false examples: + - | + tse_sub_0: ethernet@c0100000 { + compatible = "altr,tse-msgdma-1.0"; + reg = <0xc0100000 0x00000400>, + <0xc0101000 0x00000020>, + <0xc0102000 0x00000020>, + <0xc0103000 0x00000008>, + <0xc0104000 0x00000020>, + <0xc0105000 0x00000020>, + <0xc0106000 0x00000100>; + reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs"; + interrupt-parent = <&intc>; + interrupts = <0 44 4>,<0 45 4>; + interrupt-names = "rx_irq","tx_irq"; + rx-fifo-depth = <2048>; + tx-fifo-depth = <2048>; + max-frame-size = <1500>; + local-mac-address = [ 00 00 00 00 00 00 ]; + altr,has-supplementary-unicast; + altr,has-hash-multicast-filter; + sfp = <&sfp0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; - | tse_sub_1_eth_tse_0: ethernet@1,00001000 { compatible = "altr,tse-msgdma-1.0"; -- 2.37.2