On Thu, Sep 01, 2022 at 02:15:28PM +0530, Vignesh Raghavendra wrote: > > > On 10/08/22 15:09, Matt Ranostay wrote: > > From: Aswath Govindraju <a-govindraju@xxxxxx> > > > > Add dt node for the single instance of WIZ (SERDES wrapper) and > > SERDES module shared by PCIe, eDP and USB. > > > > Cc: Vignesh Raghavendra <vigneshr@xxxxxx> > > Cc: Nishanth Menon <nm@xxxxxx> > > Acked-by: Matt Ranostay <mranostay@xxxxxx> > > Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> > > --- > > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 70 ++++++++++++++++++++++ > > 1 file changed, 70 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > > index f7e359da8690..f1e02d896168 100644 > > --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > > @@ -5,6 +5,13 @@ > > * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ > > */ > > > > +/ { > > + serdes_refclk: serdes-refclk { > > clk-X > So something like 'serdes_refclk: clock-cmnrefclk' would seem to match the current naming style of other K3 platforms (albeit except j7200). > > + #clock-cells = <0>; > > + compatible = "fixed-clock"; > > + }; > > +}; > > + > > &cbass_main { > > msmc_ram: sram@70000000 { > > compatible = "mmio-sram"; > > @@ -33,6 +40,13 @@ scm_conf: scm-conf@104000 { > > #size-cells = <1>; > > ranges = <0x00 0x00 0x00104000 0x18000>; > > > > + serdes_ln_ctrl: mux-controller@80 { > > mux-controller-X > 80 is the index into the mmio region. So should it still have @ for the node name? Also this is how the rest of the K3 platforms reference the mux controller. > > + compatible = "mmio-mux"; > > + #mux-control-cells = <1>; > > + mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */ > > + <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */ > > + }; > > + > > usb_serdes_mux: mux-controller@0 { > > compatible = "mmio-mux"; > > #mux-control-cells = <1>; > > @@ -728,6 +742,62 @@ usb0: usb@6000000 { > > }; > > }; > > > > + serdes_wiz0: wiz@5060000 { > > + compatible = "ti,j721e-wiz-10g"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>; > > + clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>; > > + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; > > + num-lanes = <4>; > > + #reset-cells = <1>; > > + ranges = <0x5060000 0x0 0x5060000 0x10000>; > > + > > + assigned-clocks = <&k3_clks 365 3>; > > + assigned-clock-parents = <&k3_clks 365 7>; > > + > > + wiz0_pll0_refclk: pll0-refclk { > > please use generic node name clk-X here and elsewhere in the patch So something like 'wiz0_pll0_refclk: clk-refpll0'? - Matt > > > + clocks = <&k3_clks 365 3>, <&serdes_refclk>; > > + clock-output-names = "wiz0_pll0_refclk"; > > + #clock-cells = <0>; > > + assigned-clocks = <&wiz0_pll0_refclk>; > > + assigned-clock-parents = <&k3_clks 365 3>; > > + }; > > + > > + wiz0_pll1_refclk: pll1-refclk { > > ditto > > > + clocks = <&k3_clks 365 3>, <&serdes_refclk>; > > + clock-output-names = "wiz0_pll1_refclk"; > > + #clock-cells = <0>; > > + assigned-clocks = <&wiz0_pll1_refclk>; > > + assigned-clock-parents = <&k3_clks 365 3>; > > + }; > > + > > + wiz0_refclk_dig: refclk-dig { > > ditto > > > + clocks = <&k3_clks 365 3>, <&serdes_refclk>; > > + clock-output-names = "wiz0_refclk_dig"; > > + #clock-cells = <0>; > > + assigned-clocks = <&wiz0_refclk_dig>; > > + assigned-clock-parents = <&k3_clks 365 3>; > > + }; > > + > > + wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div { > > ditto > > > + clocks = <&wiz0_refclk_dig>; > > + #clock-cells = <0>; > > + }; > > + > > + serdes0: serdes@5060000 { > > + compatible = "ti,j721e-serdes-10g"; > > + reg = <0x05060000 0x00010000>; > > + reg-names = "torrent_phy"; > > + resets = <&serdes_wiz0 0>; > > + reset-names = "torrent_reset"; > > + clocks = <&wiz0_pll0_refclk>; > > + clock-names = "refclk"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + }; > > + }; > > + > > main_mcan0: can@2701000 { > > compatible = "bosch,m_can"; > > reg = <0x00 0x02701000 0x00 0x200>, > > -- > Regards > Vignesh
