The dwc3 USB controller of the sc7180 supports USB remote
wakeup, configure it as a wakeup source.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v2:
- use qcom/arm64-for-6.1 as base, v1 was unintendedly based on a
downstream branch that was used for testing
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e8debb0da411..af5bab27eaf3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2782,6 +2782,8 @@ usb_1: usb@a6f8800 {
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
+ wakeup-source;
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
--
2.37.2.789.g6183377224-goog
