Add pinctrl macros for AM62AX SoCs. These macro definitions are similar to that of previous platforms, but adding new definitions to avoid any naming confusions in the SoC dts files. checkpatch insists the following error exists: ERROR: Macros with complex values should be enclosed in parentheses However, we do not need parentheses enclosing the values for this macro as we do intend it to generate two separate values as has been done for other similar platforms. Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- include/dt-bindings/pinctrl/k3.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h index 6c3d02f63bfb..54df633f9bfe 100644 --- a/include/dt-bindings/pinctrl/k3.h +++ b/include/dt-bindings/pinctrl/k3.h @@ -29,6 +29,9 @@ #define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) +#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) -- 2.37.2
