[PATCH v3 5/9] riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In today's edition of moving things around:

The PCIe root port on PolarFire SoC is more part of the FPGA than of
the Core Complex. It is located on the other side of the chip and,
apart from its interrupts, most of its configuration is determined
by the FPGA bitstream rather. This includes:

- address translation in both directions
- the addresses at which the config and data regions appear to the
  core complex
- the clocks used by the AXI bus
- the plic interrupt used

Moving the PCIe node to the -fabric.dtsi makes it clearer than a
singular configuration for root port is not correct & allows the
base SoC dtsi to be more easily included.

Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
 .../dts/microchip/mpfs-icicle-kit-fabric.dtsi | 32 +++++++++++++++++--
 .../dts/microchip/mpfs-polarberry-fabric.dtsi | 29 +++++++++++++++++
 arch/riscv/boot/dts/microchip/mpfs.dtsi       | 29 -----------------
 3 files changed, 58 insertions(+), 32 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index c0fb9dd7b2c8..a21440c8ee03 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -37,8 +37,34 @@ fabric_clk1: fabric-clk1 {
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
-};
 
-&pcie {
-	dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic1", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x1 0x00000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
 };
diff --git a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
index 49380c428ec9..67303bc0e451 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-polarberry-fabric.dtsi
@@ -13,4 +13,33 @@ fabric_clk1: fabric-clk1 {
 		#clock-cells = <0>;
 		clock-frequency = <125000000>;
 	};
+
+	pcie: pcie@2000000000 {
+		compatible = "microchip,pcie-host-1.0";
+		#address-cells = <0x3>;
+		#interrupt-cells = <0x1>;
+		#size-cells = <0x2>;
+		device_type = "pci";
+		reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+		reg-names = "cfg", "apb";
+		bus-range = <0x0 0x7f>;
+		interrupt-parent = <&plic>;
+		interrupts = <119>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		interrupt-map-mask = <0 0 0 7>;
+		clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+		clock-names = "fic0", "fic1", "fic3";
+		ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+		msi-parent = <&pcie>;
+		msi-controller;
+		status = "disabled";
+		pcie_intc: interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+	};
 };
diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 74493344ea41..b1b7964608e3 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -464,35 +464,6 @@ usb: usb@20201000 {
 			status = "disabled";
 		};
 
-		pcie: pcie@2000000000 {
-			compatible = "microchip,pcie-host-1.0";
-			#address-cells = <0x3>;
-			#interrupt-cells = <0x1>;
-			#size-cells = <0x2>;
-			device_type = "pci";
-			reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
-			reg-names = "cfg", "apb";
-			bus-range = <0x0 0x7f>;
-			interrupt-parent = <&plic>;
-			interrupts = <119>;
-			interrupt-map = <0 0 0 1 &pcie_intc 0>,
-					<0 0 0 2 &pcie_intc 1>,
-					<0 0 0 3 &pcie_intc 2>,
-					<0 0 0 4 &pcie_intc 3>;
-			interrupt-map-mask = <0 0 0 7>;
-			clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
-			clock-names = "fic0", "fic1", "fic3";
-			ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
-			msi-parent = <&pcie>;
-			msi-controller;
-			status = "disabled";
-			pcie_intc: interrupt-controller {
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-			};
-		};
-
 		mbox: mailbox@37020000 {
 			compatible = "microchip,mpfs-mailbox";
 			reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>;
-- 
2.36.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux