From: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Add External DisplayPort support to the MT8195 eDP driver.
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dp.c | 139 ++++++++++++++++++++++++++++++
1 file changed, 139 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
index e37c9185e4ec..11a94927c0d0 100644
--- a/drivers/gpu/drm/mediatek/mtk_dp.c
+++ b/drivers/gpu/drm/mediatek/mtk_dp.c
@@ -35,6 +35,7 @@
#define MTK_DP_SIP_CONTROL_AARCH32 MTK_SIP_SMC_CMD(0x523)
#define MTK_DP_SIP_ATF_EDP_VIDEO_UNMUTE (BIT(0) | BIT(5))
+#define MTK_DP_SIP_ATF_VIDEO_UNMUTE BIT(5)
#define MTK_DP_THREAD_CABLE_STATE_CHG BIT(0)
#define MTK_DP_THREAD_HPD_EVENT BIT(1)
@@ -199,6 +200,89 @@ static const struct mtk_dp_efuse_fmt mt8195_edp_efuse_fmt[MTK_DP_CAL_MAX] = {
},
};
+static const struct mtk_dp_efuse_fmt mt8195_dp_efuse_fmt[MTK_DP_CAL_MAX] = {
+ [MTK_DP_CAL_GLB_BIAS_TRIM] = {
+ .idx = 0,
+ .shift = 27,
+ .mask = 0x1f,
+ .min_val = 1,
+ .max_val = 0x1e,
+ .default_val = 0xf,
+ },
+ [MTK_DP_CAL_CLKTX_IMPSE] = {
+ .idx = 0,
+ .shift = 13,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_PMOS_0] = {
+ .idx = 1,
+ .shift = 28,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_PMOS_1] = {
+ .idx = 1,
+ .shift = 20,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_PMOS_2] = {
+ .idx = 1,
+ .shift = 12,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_PMOS_3] = {
+ .idx = 1,
+ .shift = 4,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_NMOS_0] = {
+ .idx = 1,
+ .shift = 24,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_NMOS_1] = {
+ .idx = 1,
+ .shift = 16,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_NMOS_2] = {
+ .idx = 1,
+ .shift = 8,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+ [MTK_DP_CAL_LN_TX_IMPSEL_NMOS_3] = {
+ .idx = 1,
+ .shift = 0,
+ .mask = 0xf,
+ .min_val = 1,
+ .max_val = 0xe,
+ .default_val = 0x8,
+ },
+};
+
static struct regmap_config mtk_dp_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
@@ -1479,6 +1563,50 @@ static int mtk_dp_dt_parse(struct mtk_dp *mtk_dp,
return 0;
}
+static enum drm_connector_status mtk_dp_bdg_detect(struct drm_bridge *bridge)
+{
+ struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
+ enum drm_connector_status ret = connector_status_disconnected;
+ bool enabled = mtk_dp->enabled;
+ u8 sink_count = 0;
+
+ if (mtk_dp->train_info.cable_plugged_in) {
+ if (!enabled) {
+ /* power on aux */
+ mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
+ DP_PWR_STATE_BANDGAP_TPLL_LANE,
+ DP_PWR_STATE_MASK);
+
+ /* power on panel */
+ drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
+ usleep_range(2000, 5000);
+ }
+ /*
+ * Some dongles still source HPD when they do not connect to any
+ * sink device. To avoid this, we need to read the sink count
+ * to make sure we do connect to sink devices. After this detect
+ * function, we just need to check the HPD connection to check
+ * whether we connect to a sink device.
+ */
+ drm_dp_dpcd_readb(&mtk_dp->aux, DP_SINK_COUNT, &sink_count);
+ if (DP_GET_SINK_COUNT(sink_count))
+ ret = connector_status_connected;
+
+ if (!enabled) {
+ /* power off panel */
+ drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3);
+ usleep_range(2000, 3000);
+
+ /* power off aux */
+ mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
+ DP_PWR_STATE_BANDGAP_TPLL,
+ DP_PWR_STATE_MASK);
+ }
+ }
+
+ return ret;
+}
+
static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge,
struct drm_connector *connector)
{
@@ -1865,6 +1993,7 @@ static const struct drm_bridge_funcs mtk_dp_bridge_funcs = {
.atomic_disable = mtk_dp_bridge_atomic_disable,
.mode_valid = mtk_dp_bridge_mode_valid,
.get_edid = mtk_dp_get_edid,
+ .detect = mtk_dp_bdg_detect,
};
static int mtk_dp_probe(struct platform_device *pdev)
@@ -1991,11 +2120,21 @@ static const struct mtk_dp_data mt8195_edp_data = {
.efuse_fmt = mt8195_edp_efuse_fmt,
};
+static const struct mtk_dp_data mt8195_dp_data = {
+ .bridge_type = DRM_MODE_CONNECTOR_DisplayPort,
+ .smc_cmd = MTK_DP_SIP_ATF_VIDEO_UNMUTE,
+ .efuse_fmt = mt8195_dp_efuse_fmt,
+};
+
static const struct of_device_id mtk_dp_of_match[] = {
{
.compatible = "mediatek,mt8195-edp-tx",
.data = &mt8195_edp_data,
},
+ {
+ .compatible = "mediatek,mt8195-dp-tx",
+ .data = &mt8195_dp_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, mtk_dp_of_match);
--
2.18.0
