MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
Changes in v3: None
Changes in v2: Add Krzysztof's Reviewed-by
---
This fixes the following dtbs_check warning after the DT schema
conversion:
remoteproc@4080000: compatible: 'oneOf' conditional failed, one must be fixed:
['qcom,msm8916-mss-pil', 'qcom,q6v5-pil'] is too long, or
'qcom,q6v5-pil' was expected
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index de741f287e1d..147c6aa3f046 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1345,7 +1345,7 @@ bam_dmux_dma: dma-controller@4044000 {
};
mpss: remoteproc@4080000 {
- compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
+ compatible = "qcom,msm8916-mss-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
--
2.30.2
