Il 29/08/22 10:08, Chunfeng Yun ha scritto:
Add a property to set usb2 phy's pre-emphasis, it's disabled by default
on some SoCs.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2: no changes
---
drivers/phy/mediatek/phy-mtk-tphy.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 8ee7682b8e93..986fde0f63a0 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -72,6 +72,8 @@
#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
#define U3P_USBPHYACR6 0x018
+#define PA6_RG_U2_PRE_EMP GENMASK(31, 30)
+#define PA6_RG_U2_PRE_EMP_VAL(x) ((0x3 & (x)) << 30)
Hello Chunfeng,
can you please clarify which SoC is this change referred to?
If I'm not missing anything, there may be a register layout conflict between
one version and the other for T-PHYs, for which, it may be a good idea to add
a PHY version check before allowing to write settings that are supported only
on a specific IP...
Regards,
Angelo
