On 30/08/2022 18:30, Krzysztof Kozlowski wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On 30/08/2022 19:59, Conor.Dooley@xxxxxxxxxxxxx wrote: >>>> w dts were >>>> needed so that the gpio-hog could be set correctly. Out of curiosity, I can >>>> have the same compatible in multiple devicetrees right? In that case, it >>>> would just be "aries,m100pfsevp" here and I could put that in both? >>>> Would make things easier.. >>> >>> Depends, but I would say for this case rather not. The compatible should >>> identify the board. If the boards are different, one compatible should >>> not identify both of them. Imagine U-Boot (or something else) trying to >>> match the DTS. >> >> It is the same board though, the way the bootloader works is that if it >> detects an SD-card it will use that to boot from, and if not will fall back >> to the emmc. > > Wait, I might miss that part. So this is exactly the same hardware with > the same SoM/SoC, same eMMC and SD card, except that one has plugged > this SD card (as it is hot-pluggable)? yessir
