Add device trees for both configs used by the Aries Embedded M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM, featuring: - 2GB DDR4 SDRAM dedicated to the HMS - 512MB DDR4 SDRAM dedicated to the FPGA - 32 MB SPI NOR Flash - 4 GByte eMMC and a carrier board with: - 2x Gigabit Ethernet - USB - 2x UART - 2x CAN - TFT connector - HSMC extension connector - 3x PMOD extension connectors - microSD-card slot Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf Co-developed-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxxxxx> Signed-off-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxxxxx> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- arch/riscv/boot/dts/microchip/Makefile | 2 + .../dts/microchip/mpfs-m100pfs-fabric.dtsi | 45 +++++ .../dts/microchip/mpfs-m100pfsevp-emmc.dts | 37 +++++ .../dts/microchip/mpfs-m100pfsevp-sdcard.dts | 37 +++++ .../boot/dts/microchip/mpfs-m100pfsevp.dtsi | 155 ++++++++++++++++++ 5 files changed, 276 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-emmc.dts create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-sdcard.dts create mode 100644 arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dtsi diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile index f18477b2e86d..ea14afab0010 100644 --- a/arch/riscv/boot/dts/microchip/Makefile +++ b/arch/riscv/boot/dts/microchip/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp-emmc.dtb +dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp-sdcard.dtb dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi new file mode 100644 index 000000000000..7b9ee13b6a3a --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfs-fabric.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2022 Microchip Technology Inc */ + +/ { + fabric_clk3: fabric-clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <62500000>; + }; + + fabric_clk1: fabric-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + status = "disabled"; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-emmc.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-emmc.dts new file mode 100644 index 000000000000..3a656c982781 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-emmc.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Original all-in-one devicetree: + * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@xxxxxxxxxxxxxxxxx> + * Rewritten to use includes: + * Copyright (C) 2022 - Conor Dooley <conor.dooley@xxxxxxxxxxxxx> + */ + +/dts-v1/; + +#include "mpfs-m100pfsevp.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + model = "Aries Embedded M100PFEVPS eMMC"; + compatible = "aries,m100pfsevp-emmc", "microchip,mpfs"; +}; + +&gpio0 { + emmc-sel-hog { + gpio-hog; + gpios = <12 0>; + output-low; + }; +}; + +&mmc { + max-frequency = <50000000>; + bus-width = <8>; + cap-mmc-highspeed; + no-1-8-v; + non-removable; + disable-wp; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-sdcard.dts b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-sdcard.dts new file mode 100644 index 000000000000..90fdeac22d24 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp-sdcard.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Original all-in-one devicetree: + * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@xxxxxxxxxxxxxxxxx> + * Rewritten to use includes: + * Copyright (C) 2022 - Conor Dooley <conor.dooley@xxxxxxxxxxxxx> + */ + +/dts-v1/; + +#include "mpfs-m100pfsevp.dtsi" + +/ { + model = "Aries Embedded M100PFEVPS sd-card"; + compatible = "aries,m100pfsevp-sdcard", "microchip,mpfs"; +}; + +&gpio0 { + sdcard-sel-hog { + gpio-hog; + gpios = <12 0>; + output-high; + }; +}; + +&mmc { + max-frequency = <50000000>; + bus-width = <4>; + no-1-8-v; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dtsi b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dtsi new file mode 100644 index 000000000000..e6b6b4647e42 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Original all-in-one devicetree: + * Copyright (C) 2021-2022 - Wolfgang Grandegger <wg@xxxxxxxxxxxxxxxxx> + * Rewritten to use includes: + * Copyright (C) 2022 - Conor Dooley <conor.dooley@xxxxxxxxxxxxx> + */ +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-m100pfs-fabric.dtsi" + +/* Clock frequency (in Hz) of the rtcclk */ +#define RTCCLK_FREQ 1000000 + +/ { + aliases { + ethernet0 = &mac0; + ethernet1 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + gpio0 = &gpio0; + gpio1 = &gpio2; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + cpus { + timebase-frequency = <RTCCLK_FREQ>; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&gpio0 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>; + ngpios = <14>; + status = "okay"; + + pmic-irq-hog { + gpio-hog; + gpios = <13 0>; + input; + }; +}; + +&gpio2 { + interrupts = <13>, <14>, <15>, <16>, + <17>, <18>, <19>, <20>, + <21>, <22>, <23>, <24>, + <25>, <26>, <27>, <28>, + <29>, <30>, <31>, <32>, + <33>, <34>, <35>, <36>, + <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>; + status = "okay"; +}; + +&mac0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mac1 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy1>; + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; -- 2.36.1
