[PATCH v9 0/2] Lattice sysCONFIG SPI FPGA manager

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support to the FPGA manager for programming Lattice FPGAs over slave
SPI sysCONFIG interface. ECP5 and MachXO2 are supported.

WARNING: I only have HW with ECP5, so can't vouch for the MachXO2.
	 MachXO2's support is based on existing machxo2-spi.c and
	 publicly available documentation, it's not tested on real
	 hardware.

ChangeLog:
  v1 -> v2:
    * remove "spi" from compatible string
    * reword description in dt-bindings doc
    * add reference to spi-peripheral-props.yaml in dt-binding doc
    * fix DTS example in dt-bindings doc: 4-spaces indentations, no
      undersores in node names.
  v2 -> v3:
    * fix typo "##size-cells" -> "#size-cells" in dt-bindings example
  v3 -> v4:
    * dt-bindings: reword description
    * dt-bindings: revert props order
  v4 -> v5:
    * dt-bindings: remove trailing dot from title
    * dt-bindings: reword description to avoid driver reference
    * dt-bindings: add "Reviewed-by: Krzysztof Kozlowski" tag
  v5 -> v6:
    * ecp5-spi: lock SPI bus for exclusive usage in
      ecp5_ops_write_init(), release in ecp5_ops_write_complete()
      or on error
  v6 -> v7:
    * ecp5-spi.c -> lattice-sysconfig-spi.c. Reworked to represent
      generalized sysCONFIG port with implementations for ECP5 and
      MachXO2
    * lattice,ecp5-fpga-mgr.yaml -> lattice,sysconfig.yaml. Reworked to
      document both ECP5 and MachXO2 sysCONFIG.
    * dt-bindings: remove "Reviewed-by: Krzysztof Kozlowski" tag as doc
      was rewritten by a considerable amount.
  v7 -> v8:
    * dt-bindings: move "program-gpios", "init-gpios" and "done-gpios"
      to top-level properties and disallow them for MachXO2 variant.
  v8 -> v9:
    * dt-bindings: "program-gpios", "init-gpios" and "done-gpios" are
      now optional for both ECP5 and MachXO2
    * lattice-sysconfig-spi.c -> sysconfig-spi.c + sysconfig.c +
      sysconfig.h
        ** reworked to be one sysCONFIG FPGA Manager rather than two
	   distinct ECP5 and MachXO2 managers
	** splitted to port type agnostic sysconfig.c and SPI-specific
	   sysconfig-spi.c
	** command transfer function moved to callback for ease of
	   adding another port type, such as I2C

Ivan Bornyakov (2):
  fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager
  dt-bindings: fpga: document Lattice sysCONFIG FPGA manager

 .../bindings/fpga/lattice,sysconfig.yaml      | 102 +++++
 drivers/fpga/Kconfig                          |   7 +
 drivers/fpga/Makefile                         |   3 +
 drivers/fpga/sysconfig-spi.c                  | 216 +++++++++
 drivers/fpga/sysconfig.c                      | 433 ++++++++++++++++++
 drivers/fpga/sysconfig.h                      |  67 +++
 6 files changed, 828 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
 create mode 100644 drivers/fpga/sysconfig-spi.c
 create mode 100644 drivers/fpga/sysconfig.c
 create mode 100644 drivers/fpga/sysconfig.h

-- 
2.37.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux