Re: [PATCH v4 0/6] Add iMX8MP PCIe support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Dienstag, dem 30.08.2022 um 02:58 +0000 schrieb Hongxing Zhu:
> > -----Original Message-----
> > From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > Sent: 2022年8月29日 23:20
> > To: Hongxing Zhu <hongxing.zhu@xxxxxxx>; p.zabel@xxxxxxxxxxxxxx;
> > bhelgaas@xxxxxxxxxx; lorenzo.pieralisi@xxxxxxx; robh@xxxxxxxxxx;
> > shawnguo@xxxxxxxxxx; vkoul@xxxxxxxxxx; alexander.stein@xxxxxxxxxxxxxxx;
> > marex@xxxxxxx; richard.leitner@xxxxxxxxx
> > Cc: linux-phy@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; dl-linux-imx
> > <linux-imx@xxxxxxx>
> > Subject: Re: [PATCH v4 0/6] Add iMX8MP PCIe support
> > 
> > Hi Richard,
> > 
> > instead of review comments I sent you a two patches to rework things more to
> > my liking. Hope you agree with the approach.
> > 
> > One question, though: did you test this with devices with Gen2/3 speeds? The
> > Marvell WiFi module on my EVK board only links with Gen1, while it claims
> > Gen2 speed in the LnkCap register. However, it does seem to come up with
> > Gen1 as the target link speed in LnkCtl2, so maybe the device is at fault here.
> Hi Lucas:
> Thanks for your help on this series.
> I'm agree with your approach, and let blk-ctrl driver do the hsiomix resets.
> Can I include the #1 patch into this series, and rebase the 2# fixup! patch
>  into the phy changes patch with your sign-off?
> 
Sure, that's why I sent them this way. Feel free to include them in
your series with my sign-off.

> Yes, I did the Gen3 NVEM device tests on i.MX8MP EVK board.
> The Gen3 works fine.
> Logs:
> "
> [    1.808033] phy phy-32f00000.pcie-phy.1: phy_power_on was called before phy_init
> [    1.822609] imx6q-pcie 33800000.pcie: iATU unroll: enabled
> [    1.836620] imx6q-pcie 33800000.pcie: iATU regions: 4 ob, 4 ib, align 64K, limit 16G
> [    1.950427] imx6q-pcie 33800000.pcie: PCIe Gen.1 x1 link up
> [    2.058138] imx6q-pcie 33800000.pcie: PCIe Gen.3 x1 link up
> [    2.063731] imx6q-pcie 33800000.pcie: Link up, Gen3
> [    2.068619] imx6q-pcie 33800000.pcie: PCIe Gen.3 x1 link up
> "
Thanks for the confirmation.

Also can you please reorder the series, to have the DT changes at the
end?

Regards,
Lucas

> 
> Best Regards
> Richard Zhu
> > 
> > Regards,
> > Lucas
> > 
> > Am Montag, dem 29.08.2022 um 16:15 +0800 schrieb Richard Zhu:
> > > Based on the 6.0-rc1 of the pci/next branch.
> > > This series adds the i.MX8MP PCIe support and tested on i.MX8MP EVK
> > > board when one PCIe NVME device is used.
> > > 
> > > - i.MX8MP PCIe has reversed initial PERST bit value refer to
> > i.MX8MQ/i.MX8MM.
> > >   Add the PHY PERST explicitly for i.MX8MP PCIe PHY.
> > > - Add the i.MX8MP PCIe PHY support in the i.MX8M PCIe PHY driver.
> > >   And share as much as possible codes with i.MX8MM PCIe PHY.
> > > - Add the i.MX8MP PCIe support in binding document, DTS files, and PCIe
> > >   driver.
> > > 
> > > Main changes v3-->v4:
> > > - Regarding Phillip's suggestions, add fix tag into the first commit.
> > > - Add Reviewed and Tested tags.
> > > 
> > > Main changes v2-->v3:
> > > - Fix the schema checking error in the PHY dt-binding patch.
> > > - Inspired by Lucas, the PLL configurations might not required when
> > >   external OSC is used as PCIe referrence clock. It's true. Remove all
> > >   the HSIO PLL bit manipulations, and PCIe works fine on i.MX8MP EVK
> > board
> > >   with one NVME device is used.
> > > - Drop the #4 patch of v2, since it had been applied by Rob.
> > > 
> > > Main changes v1-->v2:
> > > - It's my fault forget including Vinod, re-send v2 after include Vinod
> > >   and linux-phy@xxxxxxxxxxxxxxxxxxx.
> > > - List the basements of this patch-set. The branch, codes changes and so on.
> > > - Clean up some useless register and bit definitions in #3 patch.
> > > 
> > > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml |  16
> > +++++++--
> > > arch/arm64/boot/dts/freescale/imx8mp-evk.dts                 |  53
> > +++++++++++++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi                    |  46
> > ++++++++++++++++++++++++-
> > > drivers/pci/controller/dwc/pci-imx6.c                        |  17
> > +++++++++-
> > > drivers/phy/freescale/phy-fsl-imx8m-pcie.c                   | 150
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------
> > ------------------
> > > drivers/reset/reset-imx7.c                                   |   1 +
> > > 6 files changed, 232 insertions(+), 51 deletions(-)
> > > 
> > > [PATCH v4 1/6] reset: imx7: Fix the iMX8MP PCIe PHY PERST support
> > > [PATCH v4 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding [PATCH v4
> > > 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY [PATCH v4 4/6]
> > > arm64: dts: imx8mp: Add iMX8MP PCIe support [PATCH v4 5/6] arm64: dts:
> > > imx8mp-evk: Add PCIe support [PATCH v4 6/6] PCI: imx6: Add iMX8MP PCIe
> > > support
> > 
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux