[PATCH 1/2] dt-bindings: mtd: spi-nor: Add reset-gpios property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SPI-NOR flashes have RESET pin which can be toggled using GPIO
controller, for those platforms reset-gpios property can be used to
reset the flash device.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
---
 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 7149784a36ac..d2fc8e9c787f 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -70,6 +70,12 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
+  reset-gpios:
+    description:
+      contains a GPIO specifier. The reset GPIO is asserted and then deasserted
+      to perform device reset. If "broken-flash-reset" is present then having
+      this property does not make any difference.
+
   partitions:
     type: object
 
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux