On Tue, Aug 02, 2022 at 06:57:51PM +0100, Sudip Mukherjee wrote:
> If the transfer of Transmit only mode is using dual/quad/octal SPI then
> NDF needs to be updated with the number of data frames.
> If the Transmit FIFO goes empty in-between, DWC_ssi masks the serial
> clock and wait for rest of the data until the programmed amount of
> frames are transferred successfully.
>
> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
> ---
> drivers/spi/spi-dw-core.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index 9d499bdf2ce6..8cb30540ad5b 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -344,7 +344,9 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
> dw_writel(dws, DW_SPI_CTRLR0, cr0);
>
> if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD ||
> - cfg->tmode == DW_SPI_CTRLR0_TMOD_RO)
> + cfg->tmode == DW_SPI_CTRLR0_TMOD_RO ||
> + (cfg->tmode == DW_SPI_CTRLR0_TMOD_TO &&
> + (dws->caps & DW_SPI_CAP_EXT_SPI) && cfg->spi_frf))
just (cfg->spi_frf != DW_SPI_CTRLR0_SPI_FRF_STD_SPI &&
cfg->tmode == DW_SPI_CTRLR0_TMOD_TO)
> dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf ? cfg->ndf - 1 : 0);
>
> /* Note DW APB SSI clock divider doesn't support odd numbers */
> @@ -760,6 +762,8 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
> cfg.ndf = op->data.nbytes;
> } else {
> cfg.tmode = DW_SPI_CTRLR0_TMOD_TO;
> + if (enhanced_spi)
> + cfg.ndf = op->data.nbytes;
This shall be moved to the Enhanced SPI-specific mem-op execution method:
dw_spi_exec_enh_mem_op().
-Sergey
> }
>
> dw_spi_enable_chip(dws, 0);
> --
> 2.30.2
>
