Re: [PATCH 1/7] arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 25, 2022 at 09:41:59AM -0700, Douglas Anderson wrote:
> This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
> but doesn't specify any modes with "regulator-allowed-modes".
> 
> Prior to commit efb0cb50c427 ("regulator: qcom-rpmh: Implement
> get_optimum_mode(), not set_load()") the above meant that we were able
> to set either LPM or HPM mode. After that commit (and fixes [1]) we'll
> be stuck at the initial mode. Discussion of this has resulted in the
> decision that the old dts files were wrong and should be fixed to
> fully restore old functionality.
> 
> Let's re-enable the old functionality by fixing the dts.
> 
> [1] https://lore.kernel.org/r/20220824142229.RFT.v2.2.I6f77860e5cd98bf5c67208fa9edda4a08847c304@changeid
> 
> Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index ba547ca9fc6b..ddb9cb182152 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
>  
>  		regulator-always-on;
>  		regulator-boot-on;
> -		regulator-allow-set-load;

I could see this deserving its own commit or a line in the commit
message, but not a big deal to me:

Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>

>  
>  		vin-supply = <&vreg_3p3>;
>  	};
> @@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
>  			regulator-max-microvolt = <880000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l7a_1p8: ldo7 {
> @@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
>  			regulator-max-microvolt = <2960000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l11a_0p8: ldo11 {
> @@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
>  			regulator-max-microvolt = <1200000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l7c_1p8: ldo7 {
> @@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
>  			regulator-max-microvolt = <1200000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  			regulator-allow-set-load;
> +			regulator-allowed-modes =
> +			    <RPMH_REGULATOR_MODE_LPM
> +			     RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
>  		vreg_l10c_3p3: ldo10 {
> -- 
> 2.37.2.672.g94769d06f0-goog
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux