On Thu, 25 Aug 2022 16:37:36 +0200, Andreas Böhler wrote: > The tps23861 driver does not initialize the chip and relies on it being > in auto-mode by default. On some devices, these controllers default to > OFF-Mode and hence cannot be used at all. > > This brings minimal support for initializing the controller in a user- > defined mode. > > Signed-off-by: Andreas Böhler <dev@xxxxxxxxxxx> > --- > .../bindings/hwmon/ti,tps23861.yaml | 76 +++++++++++++++++++ > 1 file changed, 76 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:28.23-33: Warning (reg_format): /example-0/i2c/tps23861@30/port@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:36.23-33: Warning (reg_format): /example-0/i2c/tps23861@30/port@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:44.23-33: Warning (reg_format): /example-0/i2c/tps23861@30/port@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:52.23-33: Warning (reg_format): /example-0/i2c/tps23861@30/port@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:27.26-33.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@0: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:27.26-33.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@0: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:35.26-41.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@1: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:35.26-41.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@1: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:43.26-49.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@2: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:43.26-49.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@2: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:51.26-57.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@3: Relying on default #address-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dts:51.26-57.21: Warning (avoid_default_addr_size): /example-0/i2c/tps23861@30/port@3: Relying on default #size-cells value Documentation/devicetree/bindings/hwmon/ti,tps23861.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
