The RZ/G2L MIPI DSI TX is embedded in the Renesas RZ/G2L family SoC's. It can operate in DSI mode, with up to four data lanes. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- v4->v5: * No change. v3->v4: * No change. v2->v3: * Added Rb tag from Geert and Laurent * Fixed the typo "Receive" -> "transmit" * Added accepible values for data-lanes * Sorted Header file in the example * Added SoC specific compaible along with generic one. v1->v2: * Added full path for dsi-controller.yaml * Modeled DSI + D-PHY as single block and updated reg property * Fixed typo D_PHY->D-PHY * Updated description * Added interrupts and interrupt-names and updated the example RFC->v1: * Added a ref to dsi-controller.yaml. RFC:- * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-22-biju.das.jz@xxxxxxxxxxxxxx/ --- .../bindings/display/bridge/renesas,dsi.yaml | 182 ++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml new file mode 100644 index 000000000000..131d5b63ec4f --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MIPI DSI Encoder + +maintainers: + - Biju Das <biju.das.jz@xxxxxxxxxxxxxx> + +description: | + This binding describes the MIPI DSI encoder embedded in the Renesas + RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with + up to four data lanes. + +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC} + - const: renesas,rzg2l-mipi-dsi + + reg: + maxItems: 1 + + interrupts: + items: + - description: Sequence operation channel 0 interrupt + - description: Sequence operation channel 1 interrupt + - description: Video-Input operation channel 1 interrupt + - description: DSI Packet Receive interrupt + - description: DSI Fatal Error interrupt + - description: DSI D-PHY PPI interrupt + - description: Debug interrupt + + interrupt-names: + items: + - const: seq0 + - const: seq1 + - const: vin1 + - const: rcv + - const: ferr + - const: ppi + - const: debug + + clocks: + items: + - description: DSI D-PHY PLL multiplied clock + - description: DSI D-PHY system clock + - description: DSI AXI bus clock + - description: DSI Register access clock + - description: DSI Video clock + - description: DSI D-PHY Escape mode transmit clock + + clock-names: + items: + - const: pllclk + - const: sysclk + - const: aclk + - const: pclk + - const: vclk + - const: lpclk + + resets: + items: + - description: MIPI_DSI_CMN_RSTB + - description: MIPI_DSI_ARESET_N + - description: MIPI_DSI_PRESET_N + + reset-names: + items: + - const: rst + - const: arst + - const: prst + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel input port + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: DSI output port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: array of physical DSI data lane indexes. + minItems: 1 + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + required: + - data-lanes + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dsi0: dsi@10850000 { + compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi"; + reg = <0x10850000 0x20000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "seq0", "seq1", "vin1", "rcv", + "ferr", "ppi", "debug"; + clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>, + <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>; + clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk"; + resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>, + <&cpg R9A07G044_MIPI_DSI_ARESET_N>, + <&cpg R9A07G044_MIPI_DSI_PRESET_N>; + reset-names = "rst", "arst", "prst"; + power-domains = <&cpg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&du_out_dsi0>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7535_in>; + }; + }; + }; + }; +... -- 2.25.1
