ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index adaf337c438c..b37244acf16a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -301,6 +301,7 @@ soc: soc {
#size-cells = <2>;
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ dma-coherent;
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1043a-clockgen";
@@ -890,7 +891,6 @@ pcie1: pcie@3400000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -918,7 +918,6 @@ pcie2: pcie@3500000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
@@ -946,7 +945,6 @@ pcie3: pcie@3600000 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- dma-coherent;
num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
--
2.37.1
