On Fri, Aug 12, 2022 at 10:25:26AM -0700, Tim Harvey wrote: > Configure the correct GPIO for UART1 CTS. > > Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> Not sure why you resent it, but it's been landed on mainline [1]. Shawn [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9635b7134c292db0b6b4d278c88d21035dad4000 > --- > arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts > index 407ab4592b4c..6692e55df752 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts > +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts > @@ -651,7 +651,7 @@ &uart1 { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; > rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; > - cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; > + cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; > uart-has-rtscts; > status = "okay"; > }; > -- > 2.25.1 >
