From: Wei Fang <wei.fang@xxxxxxx>
TJA110x REF_CLK can be configured as interface reference clock
intput or output when the RMII mode enabled. This patch add the
property to make the REF_CLK can be configurable.
Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
---
V2 change:
Correct the property name and a typo.
---
.../devicetree/bindings/net/nxp,tja11xx.yaml | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index d51da24f3505..ab8867e6939b 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -31,6 +31,22 @@ patternProperties:
description:
The ID number for the child PHY. Should be +1 of parent PHY.
+ nxp,rmii-refclk-in:
+ type: boolean
+ description: |
+ The REF_CLK is provided for both transmitted and received data
+ in RMII mode. This clock signal is provided by the PHY and is
+ typically derived from an external 25MHz crystal. Alternatively,
+ a 50MHz clock signal generated by an external oscillator can be
+ connected to pin REF_CLK. A third option is to connect a 25MHz
+ clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+ as input or output according to the actual circuit connection.
+ If present, indicates that the REF_CLK will be configured as
+ interface reference clock input when RMII mode enabled.
+ If not present, the REF_CLK will be configured as interface
+ reference clock output when RMII mode enabled.
+ Only supported on TJA1100 and TJA1101.
+
required:
- reg
@@ -44,6 +60,7 @@ examples:
tja1101_phy0: ethernet-phy@4 {
reg = <0x4>;
+ nxp,rmii-refclk-in;
};
};
- |
--
2.25.1
