Re: [PATCH v2] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 11, 2022 at 04:07:38PM +0200, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
> 
> The Verdin iMX8M Mini System on Module does not have USB-ID signal
> connected on Verdin USB_2 (usbotg2). On Verdin Development board this is
> no problem, as we have connected a USB-Hub that is always connected.
> 
> However, if Verdin USB_2 is desired to be used as a single USB-Host port
> the chipidea driver does not detect if a USB device is plugged into this
> port, due to runtime pm shutting down the PHY.
> 
> Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect
> plugging events and enumerate the usb device.
> 
> Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
> Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

Applied, thanks!



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux