Re: [PATCH v4 3/3] input: misc: rt5120: Add power key support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear reviewers:

cy_huang <u0084500@xxxxxxxxx> 於 2022年8月10日 週三 上午10:55寫道:
>
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
>
> Add RT5120 PMIC power key support.
>
> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> ---
> Since v4:
> - Add "Copyright" string and refine for GPL version string.
>
> Since v3:
> - Simplify the power key irq handler key report
> - Since press and release irq not needed to keep in private data, change 'press',
>   'release' irq as local variable only.
> - Fix Kconfig typo for pwrkey.
>
Since binding/mfd/regulator are all applied, only this one is left.
Any update about this pwrkey patch?
> ---
>  drivers/input/misc/Kconfig         |   9 +++
>  drivers/input/misc/Makefile        |   1 +
>  drivers/input/misc/rt5120-pwrkey.c | 109 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 119 insertions(+)
>  create mode 100644 drivers/input/misc/rt5120-pwrkey.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index a18ab73..92daa4d 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -891,6 +891,15 @@ config INPUT_SC27XX_VIBRA
>           To compile this driver as a module, choose M here. The module will
>           be called sc27xx_vibra.
>
> +config INPUT_RT5120_PWRKEY
> +       tristate "RT5120 PMIC power key support"
> +       depends on MFD_RT5120
> +       help
> +         This enables support for RT5120 PMIC power key driver.
> +
> +         To compile this driver as a module, choose M here. the module will
> +         be called rt5120-pwrkey.
> +
>  config INPUT_STPMIC1_ONKEY
>         tristate "STPMIC1 PMIC Onkey support"
>         depends on MFD_STPMIC1
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 28dfc44..d1fb00e 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -69,6 +69,7 @@ obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON) += rave-sp-pwrbutton.o
>  obj-$(CONFIG_INPUT_RB532_BUTTON)       += rb532_button.o
>  obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)   += regulator-haptic.o
>  obj-$(CONFIG_INPUT_RETU_PWRBUTTON)     += retu-pwrbutton.o
> +obj-$(CONFIG_INPUT_RT5120_PWRKEY)      += rt5120-pwrkey.o
>  obj-$(CONFIG_INPUT_AXP20X_PEK)         += axp20x-pek.o
>  obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)        += rotary_encoder.o
>  obj-$(CONFIG_INPUT_RK805_PWRKEY)       += rk805-pwrkey.o
> diff --git a/drivers/input/misc/rt5120-pwrkey.c b/drivers/input/misc/rt5120-pwrkey.c
> new file mode 100644
> index 00000000..94d25ba
> --- /dev/null
> +++ b/drivers/input/misc/rt5120-pwrkey.c
> @@ -0,0 +1,109 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2022 Richtek Technology Corp.
> + * Author: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define RT5120_REG_INTSTAT     0x1E
> +#define RT5120_PWRKEYSTAT_MASK BIT(7)
> +
> +struct rt5120_priv {
> +       struct regmap *regmap;
> +       struct input_dev *input;
> +};
> +
> +static irqreturn_t rt5120_pwrkey_handler(int irq, void *devid)
> +{
> +       struct rt5120_priv *priv = devid;
> +       unsigned int stat;
> +       int ret;
> +
> +       ret = regmap_read(priv->regmap, RT5120_REG_INTSTAT, &stat);
> +       if (ret)
> +               return IRQ_NONE;
> +
> +       input_report_key(priv->input, KEY_POWER,
> +                        !(stat & RT5120_PWRKEYSTAT_MASK));
> +       input_sync(priv->input);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int rt5120_pwrkey_probe(struct platform_device *pdev)
> +{
> +       struct rt5120_priv *priv;
> +       struct device *dev = &pdev->dev;
> +       int press_irq, release_irq;
> +       int ret;
> +
> +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +       if (!priv)
> +               return -ENOMEM;
> +
> +       priv->regmap = dev_get_regmap(dev->parent, NULL);
> +       if (!priv->regmap)
> +               return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n");
> +
> +       press_irq = platform_get_irq_byname(pdev, "pwrkey-press");
> +       if (press_irq < 0)
> +               return press_irq;
> +
> +       release_irq = platform_get_irq_byname(pdev, "pwrkey-release");
> +       if (release_irq < 0)
> +               return release_irq;
> +
> +       /* Make input device be device resource managed */
> +       priv->input = devm_input_allocate_device(dev);
> +       if (!priv->input)
> +               return dev_err_probe(dev, -ENOMEM,
> +                                    "Failed to allocate input device\n");
> +
> +       priv->input->name = "rt5120_pwrkey";
> +       priv->input->phys = "rt5120_pwrkey/input0";
> +       priv->input->id.bustype = BUS_I2C;
> +       input_set_capability(priv->input, EV_KEY, KEY_POWER);
> +
> +       ret = input_register_device(priv->input);
> +       if (ret)
> +               return dev_err_probe(dev, ret,
> +                                    "Failed to register input device\n");
> +
> +       ret = devm_request_threaded_irq(dev, press_irq, NULL,
> +                                       rt5120_pwrkey_handler, 0,
> +                                       "pwrkey-press", priv);
> +       if (ret)
> +               return dev_err_probe(dev, ret,
> +                                    "Failed to register pwrkey press irq\n");
> +
> +       return devm_request_threaded_irq(dev, release_irq, NULL,
> +                                        rt5120_pwrkey_handler, 0,
> +                                        "pwrkey-release", priv);
> +}
> +
> +static const struct of_device_id r5120_pwrkey_match_table[] = {
> +       { .compatible = "richtek,rt5120-pwrkey" },
> +       {}
> +};
> +MODULE_DEVICE_TABLE(of, r5120_pwrkey_match_table);
> +
> +static struct platform_driver rt5120_pwrkey_driver = {
> +       .driver = {
> +               .name = "rt5120-pwrkey",
> +               .of_match_table = r5120_pwrkey_match_table,
> +       },
> +       .probe = rt5120_pwrkey_probe,
> +};
> +module_platform_driver(rt5120_pwrkey_driver);
> +
> +MODULE_AUTHOR("ChiYuan Huang <cy_huang@xxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Richtek RT5120 power key driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux