Hello:
This series was applied to netdev/net-next.git (master)
by Jakub Kicinski <kuba@xxxxxxxxxx>:
On Thu, 18 Aug 2022 11:00:52 +0800 you wrote:
> From: Wei Fang <wei.fang@xxxxxxx>
>
> The patches add the ability to disable the hibernation mode of AR803x
> PHYs. Hibernation mode defaults to enabled after hardware reset on
> these PHYs. If the AR803x PHYs enter hibernation mode, they will not
> provide any clock. For some MACs, they might need the clocks which
> provided by the PHYs to support their own hardware logic.
> So, the patches add the support to disable hibernation mode by adding
> a boolean:
> qca,disable-hibernation-mode
> If one wished to disable hibernation mode to better match with the
> specifical MAC, just add this property in the phy node of DT.
>
> [...]
Here is the summary with links:
- [V3,net,1/2] dt-bindings: net: ar803x: add disable-hibernation-mode propetry
https://git.kernel.org/netdev/net-next/c/2e7f089914b9
- [V3,net,2/2] net: phy: at803x: add disable hibernation mode support
https://git.kernel.org/netdev/net-next/c/9ecf04016c87
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
