Hi Nancy,
On Mon, Jul 11, 2022 at 03:52:42PM +0800, Nancy.Lin wrote:
[..]
> static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
> .clk_driver = "clk-mt2701-mm",
> .routes = mmsys_default_routing_table,
> @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
> .routes = mmsys_default_routing_table,
> .num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> + .num_resets = 32,
> };
>
> static const struct mtk_mmsys_match_data mt8173_mmsys_match_data = {
> @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
> .routes = mmsys_mt8183_routing_table,
> .num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> + .num_resets = 32,
> };
>
> static const struct mtk_mmsys_match_data mt8183_mmsys_match_data = {
> @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
> .routes = mmsys_mt8186_routing_table,
> .num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
> .sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> + .num_resets = 32,
> };
[..]
> @@ -351,18 +362,6 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
> return ret;
> }
>
> - spin_lock_init(&mmsys->lock);
> -
> - mmsys->rcdev.owner = THIS_MODULE;
> - mmsys->rcdev.nr_resets = 32;
The number of resets was previously always set to 32, and now you're instead
setting it based on num_resets from each machine. The issue is, you're
forgetting a bunch of them.
mt8192 didn't get a num_reset, so this commit breaks the display on mt8192 based
devices. But mt8192 isn't the only one, there are other platforms missing this
property. Please set num_resets to 32 in every single one of them, otherwise
there will be display regressions.
Thanks,
Nícolas
