This converts the MAC portion of the FMan MAC bindings to yaml. Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Camelia Groza <camelia.groza@xxxxxxx> --- (no changes since v3) Changes in v3: - Incorperate some minor changes into the first FMan binding commit Changes in v2: - New .../bindings/net/fsl,fman-dtsec.yaml | 145 ++++++++++++++++++ .../devicetree/bindings/net/fsl-fman.txt | 128 +--------------- 2 files changed, 146 insertions(+), 127 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml new file mode 100644 index 000000000000..3a35ac1c260d --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FMan MAC + +maintainers: + - Madalin Bucur <madalin.bucur@xxxxxxx> + +description: | + Each FMan has several MACs, each implementing an Ethernet interface. Earlier + versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for + 10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller + (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate + Ethernet Media Access Controller (mEMAC) to handle all speeds. + +properties: + compatible: + enum: + - fsl,fman-dtsec + - fsl,fman-xgec + - fsl,fman-memac + + cell-index: + maximum: 64 + description: | + FManV2: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16] XGEC 8 + FM_EPI[16+n] dTSECn n-1 + FM_NPI[11+n] dTSECn n-1 + n = 1,..,5 + + FManV3: + register[bit] MAC cell-index + ============================================================ + FM_EPI[16+n] mEMACn n-1 + FM_EPI[25] mEMAC10 9 + + FM_NPI[11+n] mEMACn n-1 + FM_NPI[10] mEMAC10 9 + FM_NPI[11] mEMAC9 8 + n = 1,..8 + + FM_EPI and FM_NPI are located in the FMan memory map. + + 2. SoC registers: + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_DEVDISR2[7] 1 XGEC 8 + DCFG_DEVDISR2[7+n] 1 dTSECn n-1 + DCFG_DEVDISR2[15] 2 XGEC 8 + DCFG_DEVDISR2[15+n] 2 dTSECn n-1 + n = 1,..5 + + - T1040, T2080, T4240, B4860: + register[bit] FMan MAC cell + Unit index + ============================================================ + DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 + DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 + n = 1,..6,9,10 + + EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + + reg: + maxItems: 1 + + fsl,fman-ports: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: | + An array of two references: the first is the FMan RX port and the second + is the TX port used by this MAC. + + ptp-timer: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the IEEE1588 timer + + pcsphy-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the PCS (typically found on the SerDes) + + tbi-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: A reference to the (TBI-based) PCS + +required: + - compatible + - cell-index + - reg + - fsl,fman-ports + - ptp-timer + +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: fsl,fman-dtsec + then: + required: + - tbi-handle + - if: + properties: + compatible: + contains: + const: fsl,fman-memac + then: + required: + - pcsphy-handle + +unevaluatedProperties: false + +examples: + - | + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; + ptp-timer = <&ptp_timer>; + tbi-handle = <&tbi0>; + }; + - | + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + pcsphy-handle = <&pcsphy4>; + phy-handle = <&sgmii_phy1>; + phy-connection-type = "sgmii"; + }; +... diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 801efc7d6818..b9055335db3b 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -232,133 +232,7 @@ port@81000 { ============================================================================= FMan dTSEC/XGEC/mEMAC Node -DESCRIPTION - -mEMAC/dTSEC/XGEC are the Ethernet network interfaces - -PROPERTIES - -- compatible - Usage: required - Value type: <stringlist> - Definition: A standard property. - Must include one of the following: - - "fsl,fman-dtsec" for dTSEC MAC - - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac" for mEMAC MAC - -- cell-index - Usage: required - Value type: <u32> - Definition: Specifies the MAC id. - - The cell-index value may be used by the FMan or the SoC, to - identify the MAC unit in the FMan (or SoC) memory map. - In the tables below there's a description of the cell-index - use, there are two tables, one describes the use of cell-index - by the FMan, the second describes the use by the SoC: - - 1. FMan Registers - - FManV2: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16] XGEC 8 - FM_EPI[16+n] dTSECn n-1 - FM_NPI[11+n] dTSECn n-1 - n = 1,..,5 - - FManV3: - register[bit] MAC cell-index - ============================================================ - FM_EPI[16+n] mEMACn n-1 - FM_EPI[25] mEMAC10 9 - - FM_NPI[11+n] mEMACn n-1 - FM_NPI[10] mEMAC10 9 - FM_NPI[11] mEMAC9 8 - n = 1,..8 - - FM_EPI and FM_NPI are located in the FMan memory map. - - 2. SoC registers: - - - P2041, P3041, P4080 P5020, P5040: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_DEVDISR2[7] 1 XGEC 8 - DCFG_DEVDISR2[7+n] 1 dTSECn n-1 - DCFG_DEVDISR2[15] 2 XGEC 8 - DCFG_DEVDISR2[15+n] 2 dTSECn n-1 - n = 1,..5 - - - T1040, T2080, T4240, B4860: - register[bit] FMan MAC cell - Unit index - ============================================================ - DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1 - DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1 - n = 1,..6,9,10 - - EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in - the specific SoC "Device Configuration/Pin Control" Memory - Map. - -- reg - Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. - -- fsl,fman-ports - Usage: required - Value type: <prop-encoded-array> - Definition: An array of two phandles - the first references is - the FMan RX port and the second is the TX port used by this - MAC. - -- ptp-timer - Usage required - Value type: <phandle> - Definition: A phandle for 1EEE1588 timer. - -- pcsphy-handle - Usage required for "fsl,fman-memac" MACs - Value type: <phandle> - Definition: A phandle for pcsphy. - -- tbi-handle - Usage required for "fsl,fman-dtsec" MACs - Value type: <phandle> - Definition: A phandle for tbiphy. - -EXAMPLE - -fman1_tx28: port@a8000 { - cell-index = <0x28>; - compatible = "fsl,fman-v2-port-tx"; - reg = <0xa8000 0x1000>; -}; - -fman1_rx8: port@88000 { - cell-index = <0x8>; - compatible = "fsl,fman-v2-port-rx"; - reg = <0x88000 0x1000>; -}; - -ptp-timer: ptp_timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; -}; - -ethernet@e0000 { - compatible = "fsl,fman-dtsec"; - cell-index = <0>; - reg = <0xe0000 0x1000>; - fsl,fman-ports = <&fman1_rx8 &fman1_tx28>; - ptp-timer = <&ptp-timer>; - tbi-handle = <&tbi0>; -}; +Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml ============================================================================ FMan IEEE 1588 Node -- 2.35.1.1320.gc452695387.dirty
