Re: [PATCH 1/1] riscv: dts: microchip: correct L2 cache interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/18/22 09:03, Daire.McNamara@xxxxxxxxxxxxx wrote:
On Wed, 2022-08-17 at 18:04 +0000, Conor Dooley - M52691 wrote:
Hey Heinrich,
Interesting CC list you got there! Surprised the mailmap didn't sort
out Atish & Krzysztof's addresses, but I think I've fixed them up.
  I see Daire isn't there either so +CC him too.

On 17/08/2022 14:25, Heinrich Schuchardt wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you
know the content is safe

The "PolarFire SoC MSS Technical Reference Manual" documents the
following PLIC interrupts:

1 - L2 Cache Controller Signals when a metadata correction event
occurs
2 - L2 Cache Controller Signals when an uncorrectable metadata
event occurs
3 - L2 Cache Controller Signals when a data correction event occurs
4 - L2 Cache Controller Signals when an uncorrectable data event
occurs

This differs from the SiFive FU540 which only has three L2 cache
related
interrupts.

The sequence in the device tree is defined by an enum:
in drivers/soc/sifive/sifive_l2_cache.c

     enum {
             DIR_CORR = 0,
             DATA_CORR,
             DATA_UNCORR,
             DIR_UNCORR,
     };

Nit: more accurately by the dt-binding:
   interrupts:
     minItems: 3
     items:
       - description: DirError interrupt
       - description: DataError interrupt
       - description: DataFail interrupt
       - description: DirFail interrupt

I do find the names in the enum to be a bit more understandable
however,
and ditto for the descriptions in our TRM... Maybe I should put that
on
my todo list of cleanups :)


So the correct sequence of the L2 cache interrupts is

     interrupts = <1>, <3>, <4>, <2>;

This looks correct to me. You mentioned on IRC that what you were
seeing
was a wall of
L2CACHE: DataFail @ 0x00000000.0807FFD8
 From a quick look at the driver, what seems to be happening here is
that
at some point (possibly before Linux even comes into the picture)
there
is an uncorrectable data error. Because the ordering in the dt is
wrong,
we read the wrong register and so the interrupt is never actually
cleared. With this patch applied, I see a single DataFail right as
the
interrupt gets registed & nothing after that.

I am not really sure what value there is in enabling that driver
though,
mostly just seems like a debugging tool & from our pov we would see
the
HSS running in the monitor core as being responsible for handling the
l2-cache errors.

@Daire, maybe you have an opinion here?
Likewise. The new ordering of the interrupts to what the driver expects
looks correct - as far as it goes. However, I'm not convinced enabling
the SiFive l2 cache driver out of the box makes sense. Using l2 cache
driver doesn't align terribly well with the current MPFS roadmap for
mgt of ECC errors.

Patch LGTM, so I'll likely apply it in the next day or two, would
just
like to see what Daire has to say first.
If l2-cache controller is enabled, then interrupts should be connected
as per TRM.  I think this specific patch lgtm, ideally with a
'disabled' stanza and it's up to individual MPFS customers/boards to
enable l2 cache controller if they want it.

Disabling the device in the device-tree is orthogonal to fixing the interrupt sequence. I would suggest that you use a separate patch for adding status = "disabled";.

Best regards

Heinrich


Fixes: e35b07a7df9b ("riscv: dts: microchip: mpfs: Group tuples in
interrupt properties")

BTW, it isn't really fixing this patch right? This is a dependency
for
backports to 5.15.

Thanks for your patch,
Conor.

Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE
board")
Cc: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Heinrich Schuchardt <
heinrich.schuchardt@xxxxxxxxxxxxx>
---
  arch/riscv/boot/dts/microchip/mpfs.dtsi | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi
b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 496d3b7642bd..ec1de6344be9 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -169,7 +169,7 @@ cctrllr: cache-controller@2010000 {
                         cache-size = <2097152>;
                         cache-unified;
                         interrupt-parent = <&plic>;
-                       interrupts = <1>, <2>, <3>;
+                       interrupts = <1>, <3>, <4>, <2>;
                 };

                 clint: clint@2000000 {
--
2.36.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux