The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/ipq6018-cp01-c1.dtb: hwlock: 'reg' is a required property
qcom/ipq6018-cp01-c1.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 6b35f03c4862..a7c7ca980a71 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -129,12 +129,6 @@ scm {
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x80>;
- #hwlock-cells = <1>;
- };
-
pmuv8: pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -252,9 +246,10 @@ gcc: gcc@1800000 {
#reset-cells = <1>;
};
- tcsr_mutex_regs: syscon@1905000 {
- compatible = "syscon";
- reg = <0x0 0x01905000 0x0 0x8000>;
+ tcsr_mutex: hwlock@1905000 {
+ compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex";
+ reg = <0x0 0x01905000 0x0 0x1000>;
+ #hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
--
2.34.1
