On 15/08/2022 14:01, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>
> This is the layout used by the bootloader. Add it to the kernel
> devicetree to make the same layout available in Linux and have
> the devicetrees synced.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> ---
> Changes in v3:
> * rebase on v6.0-rc1
>
> Changes in v2:
> * new patch
> ---
> .../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 21 +++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
> index ce9c27619e26..c227ca813d9e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
> @@ -66,6 +66,27 @@ flash@0 {
> compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
> spi-max-frequency = <80000000>;
> reg = <0>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0 0x1E0000>;
lowercase hex everywhere
> + };
> +
> + partition@1 {
> + label = "env";
> + reg = <0x1E0000 0x10000>;
Your reg does not match unit address. It should cause dtc warnings.
Best regards,
Krzysztof
