On Sun, 14 Aug 2022 23:34:34 -0500, Samuel Holland wrote: > Some sunxi SoCs have in-package regulators controlled by a register in > the system control MMIO block. Allow a child node for these regulators > in addition to SRAM child nodes. > > Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> > --- > > Changes in v3: > - Require the regulators node to have a unit address > - Reference the regulator schema from the SRAM controller schema > - Move the system LDOs example to the SRAM controller schema > - Reorder the patches so the example passes validation > > Changes in v2: > - New patch for v2 > > .../allwinner,sun4i-a10-system-control.yaml | 29 +++++++++++++++++++ > 1 file changed, 29 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.example.dtb:0:0: /example-1/syscon@3000000: failed to match any schema with compatible: ['allwinner,sun20i-d1-system-control'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
