Now that several D1-based boards are supported, enable the platform in our defconfig. Build in the drivers which are necessary to boot, such as the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash), and watchdog (which may be left enabled by the bootloader). Other common onboard peripherals are enabled as modules. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- arch/riscv/configs/defconfig | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index aed332a9d4ea..8f856982da87 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set CONFIG_PROFILING=y +CONFIG_ARCH_SUNXI=y CONFIG_SOC_MICROCHIP_POLARFIRE=y CONFIG_SOC_SIFIVE=y CONFIG_SOC_STARFIVE=y @@ -118,22 +119,31 @@ CONFIG_VIRTIO_NET=y CONFIG_MACB=y CONFIG_E1000E=y CONFIG_R8169=y +CONFIG_STMMAC_ETH=m CONFIG_MICROSEMI_PHY=y CONFIG_INPUT_MOUSEDEV=y +CONFIG_KEYBOARD_SUN4I_LRADC=m CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_VIRTIO_CONSOLE=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_I2C_MV64XXX=m CONFIG_SPI=y CONFIG_SPI_SIFIVE=y +CONFIG_SPI_SUN6I=y # CONFIG_PTP_1588_CLOCK is not set -CONFIG_GPIOLIB=y CONFIG_GPIO_SIFIVE=y +CONFIG_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_DRM=m CONFIG_DRM_RADEON=m CONFIG_DRM_NOUVEAU=m +CONFIG_DRM_SUN4I=m CONFIG_DRM_VIRTIO_GPU=m CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -146,19 +156,30 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_UAS=y +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SUNXI=m +CONFIG_NOP_USB_XCEIV=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SPI=y +CONFIG_MMC_SUNXI=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_SUN6I=y +CONFIG_DMADEVICES=y +CONFIG_DMA_SUN6I=m CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_INPUT=y CONFIG_VIRTIO_MMIO=y +CONFIG_SUN8I_DE2_CCU=m +CONFIG_SUN50I_IOMMU=y CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_CTRL=y CONFIG_RPMSG_VIRTIO=y +CONFIG_PHY_SUN4I_USB=m +CONFIG_NVMEM_SUNXI_SID=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -- 2.35.1
