From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Fix reset GPIO polarity in-line with the following commit feedaacdadfc ("Input: atmel_mxt_ts - fix up inverted RESET handler"). Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus") Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c5987bdbb383..1c74c6a19449 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -628,7 +628,7 @@ atmel_mxt_ts_mezzanine: touch-mezzanine@4a { interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x4a>; /* Verdin GPIO_2 (SODIMM 208) */ - reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "disabled"; }; }; @@ -705,7 +705,7 @@ atmel_mxt_ts: touch@4a { pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; }; -- 2.36.1