[PATCH v4 4/7] remoteproc: qcom: Replace hard coded values with macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace hard coded values of QDSP6 boot control reg params
with appropriate macro names.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/remoteproc/qcom_q6v5_adsp.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 6d409ca..701a615 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -54,6 +54,9 @@
 
 #define QCOM_Q6V5_RPROC_PROXY_PD_MAX	3
 
+#define LPASS_BOOT_CORE_START	BIT(0)
+#define LPASS_BOOT_CMD_START	BIT(0)
+
 struct adsp_pil_data {
 	int crash_reason_smem;
 	const char *firmware_name;
@@ -366,10 +369,10 @@ static int adsp_start(struct rproc *rproc)
 	writel(adsp->mem_phys >> 4, adsp->qdsp6ss_base + RST_EVB_REG);
 
 	/* De-assert QDSP6 stop core. QDSP6 will execute after out of reset */
-	writel(0x1, adsp->qdsp6ss_base + CORE_START_REG);
+	writel(LPASS_BOOT_CORE_START, adsp->qdsp6ss_base + CORE_START_REG);
 
 	/* Trigger boot FSM to start QDSP6 */
-	writel(0x1, adsp->qdsp6ss_base + BOOT_CMD_REG);
+	writel(LPASS_BOOT_CMD_START, adsp->qdsp6ss_base + BOOT_CMD_REG);
 
 	/* Wait for core to come out of reset */
 	ret = readl_poll_timeout(adsp->qdsp6ss_base + BOOT_STATUS_REG,
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux