A100 features an updated DPHY, which moves PLL control inside the DPHY
register space (previously the PLL was controlled from the CCU). It also
requires a modified analog power-on sequence. This "combo PHY" can also
be used as an LVDS PHY, but that is not yet supported by the driver.
Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 143 +++++++++++++++++++-
1 file changed, 142 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 6a1993c434e8..9911c4a5c318 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -70,11 +70,19 @@
#define SUN6I_DPHY_ANA0_REG 0x4c
#define SUN6I_DPHY_ANA0_REG_PWS BIT(31)
+#define SUN6I_DPHY_ANA0_REG_PWEND BIT(30)
+#define SUN6I_DPHY_ANA0_REG_PWENC BIT(29)
#define SUN6I_DPHY_ANA0_REG_DMPC BIT(28)
#define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24)
+#define SUN6I_DPHY_ANA0_REG_SRXDT(n) (((n) & 0xf) << 20)
+#define SUN6I_DPHY_ANA0_REG_SRXCK(n) (((n) & 0xf) << 16)
+#define SUN6I_DPHY_ANA0_REG_SDIV2 BIT(15)
#define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12)
#define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8)
+#define SUN6I_DPHY_ANA0_REG_PLR(n) (((n) & 0xf) << 4)
#define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2)
+#define SUN6I_DPHY_ANA0_REG_RSD BIT(1)
+#define SUN6I_DPHY_ANA0_REG_SELSCK BIT(0)
#define SUN6I_DPHY_ANA1_REG 0x50
#define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31)
@@ -97,8 +105,13 @@
#define SUN6I_DPHY_ANA3_EN_LDOR BIT(18)
#define SUN6I_DPHY_ANA4_REG 0x5c
+#define SUN6I_DPHY_ANA4_REG_EN_MIPI BIT(31)
+#define SUN6I_DPHY_ANA4_REG_EN_COMTEST BIT(30)
+#define SUN6I_DPHY_ANA4_REG_COMTEST(n) (((n) & 3) << 28)
+#define SUN6I_DPHY_ANA4_REG_IB(n) (((n) & 3) << 25)
#define SUN6I_DPHY_ANA4_REG_DMPLVC BIT(24)
#define SUN6I_DPHY_ANA4_REG_DMPLVD(n) (((n) & 0xf) << 20)
+#define SUN6I_DPHY_ANA4_REG_VTT_SET(n) (((n) & 0x7) << 17)
#define SUN6I_DPHY_ANA4_REG_CKDV(n) (((n) & 0x1f) << 12)
#define SUN6I_DPHY_ANA4_REG_TMSC(n) (((n) & 3) << 10)
#define SUN6I_DPHY_ANA4_REG_TMSD(n) (((n) & 3) << 8)
@@ -109,6 +122,56 @@
#define SUN6I_DPHY_DBG5_REG 0xf4
+#define SUN50I_DPHY_TX_SLEW_REG0 0xf8
+#define SUN50I_DPHY_TX_SLEW_REG1 0xfc
+#define SUN50I_DPHY_TX_SLEW_REG2 0x100
+
+#define SUN50I_DPHY_PLL_REG0 0x104
+#define SUN50I_DPHY_PLL_REG0_CP36_EN BIT(23)
+#define SUN50I_DPHY_PLL_REG0_LDO_EN BIT(22)
+#define SUN50I_DPHY_PLL_REG0_EN_LVS BIT(21)
+#define SUN50I_DPHY_PLL_REG0_PLL_EN BIT(20)
+#define SUN50I_DPHY_PLL_REG0_P(n) (((n) & 0xf) << 16)
+#define SUN50I_DPHY_PLL_REG0_N(n) (((n) & 0xff) << 8)
+#define SUN50I_DPHY_PLL_REG0_NDET BIT(7)
+#define SUN50I_DPHY_PLL_REG0_TDIV BIT(6)
+#define SUN50I_DPHY_PLL_REG0_M0(n) (((n) & 3) << 4)
+#define SUN50I_DPHY_PLL_REG0_M1(n) ((n) & 0xf)
+
+#define SUN50I_DPHY_PLL_REG1 0x108
+#define SUN50I_DPHY_PLL_REG1_UNLOCK_MDSEL(n) (((n) & 3) << 14)
+#define SUN50I_DPHY_PLL_REG1_LOCKMDSEL BIT(13)
+#define SUN50I_DPHY_PLL_REG1_LOCKDET_EN BIT(12)
+#define SUN50I_DPHY_PLL_REG1_VSETA(n) (((n) & 0x7) << 9)
+#define SUN50I_DPHY_PLL_REG1_VSETD(n) (((n) & 0x7) << 6)
+#define SUN50I_DPHY_PLL_REG1_LPF_SW BIT(5)
+#define SUN50I_DPHY_PLL_REG1_ICP_SEL(n) (((n) & 3) << 3)
+#define SUN50I_DPHY_PLL_REG1_ATEST_SEL(n) (((n) & 3) << 1)
+#define SUN50I_DPHY_PLL_REG1_TEST_EN BIT(0)
+
+#define SUN50I_DPHY_PLL_REG2 0x10c
+#define SUN50I_DPHY_PLL_REG2_SDM_EN BIT(31)
+#define SUN50I_DPHY_PLL_REG2_FF_EN BIT(30)
+#define SUN50I_DPHY_PLL_REG2_SS_EN BIT(29)
+#define SUN50I_DPHY_PLL_REG2_SS_FRAC(n) (((n) & 0x1ff) << 20)
+#define SUN50I_DPHY_PLL_REG2_SS_INT(n) (((n) & 0xff) << 12)
+#define SUN50I_DPHY_PLL_REG2_FRAC(n) ((n) & 0xfff)
+
+#define SUN50I_COMBO_PHY_REG0 0x110
+#define SUN50I_COMBO_PHY_REG0_EN_TEST_COMBOLDO BIT(5)
+#define SUN50I_COMBO_PHY_REG0_EN_TEST_0P8 BIT(4)
+#define SUN50I_COMBO_PHY_REG0_EN_MIPI BIT(3)
+#define SUN50I_COMBO_PHY_REG0_EN_LVDS BIT(2)
+#define SUN50I_COMBO_PHY_REG0_EN_COMBOLDO BIT(1)
+#define SUN50I_COMBO_PHY_REG0_EN_CP BIT(0)
+
+#define SUN50I_COMBO_PHY_REG1 0x114
+#define SUN50I_COMBO_PHY_REG2_REG_VREF1P6(n) (((n) & 0x7) << 4)
+#define SUN50I_COMBO_PHY_REG2_REG_VREF0P8(n) ((n) & 0x7)
+
+#define SUN50I_COMBO_PHY_REG2 0x118
+#define SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(n) ((n) & 0xff)
+
enum sun6i_dphy_direction {
SUN6I_DPHY_DIRECTION_TX,
SUN6I_DPHY_DIRECTION_RX,
@@ -196,6 +259,76 @@ static void sun6i_a31_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
udelay(1);
}
+static void sun50i_a100_mipi_dphy_tx_power_on(struct sun6i_dphy *dphy)
+{
+ unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate;
+ unsigned int div, n;
+
+ regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG,
+ SUN6I_DPHY_ANA4_REG_IB(2) |
+ SUN6I_DPHY_ANA4_REG_DMPLVD(4) |
+ SUN6I_DPHY_ANA4_REG_VTT_SET(3) |
+ SUN6I_DPHY_ANA4_REG_CKDV(3) |
+ SUN6I_DPHY_ANA4_REG_TMSD(1) |
+ SUN6I_DPHY_ANA4_REG_TMSC(1) |
+ SUN6I_DPHY_ANA4_REG_TXPUSD(2) |
+ SUN6I_DPHY_ANA4_REG_TXPUSC(3) |
+ SUN6I_DPHY_ANA4_REG_TXDNSD(2) |
+ SUN6I_DPHY_ANA4_REG_TXDNSC(3));
+
+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
+ SUN6I_DPHY_ANA2_EN_CK_CPU,
+ SUN6I_DPHY_ANA2_EN_CK_CPU);
+
+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA2_REG,
+ SUN6I_DPHY_ANA2_REG_ENIB,
+ SUN6I_DPHY_ANA2_REG_ENIB);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG,
+ SUN6I_DPHY_ANA3_EN_LDOR |
+ SUN6I_DPHY_ANA3_EN_LDOC |
+ SUN6I_DPHY_ANA3_EN_LDOD);
+
+ regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
+ SUN6I_DPHY_ANA0_REG_PLR(4) |
+ SUN6I_DPHY_ANA0_REG_SFB(1));
+
+ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG0,
+ SUN50I_COMBO_PHY_REG0_EN_CP);
+
+ /* Choose a divider to limit the VCO frequency to around 2 GHz. */
+ div = 16 >> order_base_2(DIV_ROUND_UP(mipi_symbol_rate, 264000000));
+ n = mipi_symbol_rate * div / 24000000;
+
+ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG0,
+ SUN50I_DPHY_PLL_REG0_CP36_EN |
+ SUN50I_DPHY_PLL_REG0_LDO_EN |
+ SUN50I_DPHY_PLL_REG0_EN_LVS |
+ SUN50I_DPHY_PLL_REG0_PLL_EN |
+ SUN50I_DPHY_PLL_REG0_NDET |
+ SUN50I_DPHY_PLL_REG0_P((div - 1) % 8) |
+ SUN50I_DPHY_PLL_REG0_N(n) |
+ SUN50I_DPHY_PLL_REG0_M0((div - 1) / 8) |
+ SUN50I_DPHY_PLL_REG0_M1(2));
+
+ /* Disable sigma-delta modulation. */
+ regmap_write(dphy->regs, SUN50I_DPHY_PLL_REG2, 0);
+
+ regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA4_REG,
+ SUN6I_DPHY_ANA4_REG_EN_MIPI,
+ SUN6I_DPHY_ANA4_REG_EN_MIPI);
+
+ regmap_update_bits(dphy->regs, SUN50I_COMBO_PHY_REG0,
+ SUN50I_COMBO_PHY_REG0_EN_MIPI |
+ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO,
+ SUN50I_COMBO_PHY_REG0_EN_MIPI |
+ SUN50I_COMBO_PHY_REG0_EN_COMBOLDO);
+
+ regmap_write(dphy->regs, SUN50I_COMBO_PHY_REG2,
+ SUN50I_COMBO_PHY_REG2_HS_STOP_DLY(20));
+ udelay(1);
+}
+
static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
{
u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0);
@@ -408,7 +541,7 @@ static const struct regmap_config sun6i_dphy_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = SUN6I_DPHY_DBG5_REG,
+ .max_register = SUN50I_COMBO_PHY_REG2,
.name = "mipi-dphy",
};
@@ -483,11 +616,19 @@ static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
.supports_rx = true,
};
+static const struct sun6i_dphy_variant sun50i_a100_mipi_dphy_variant = {
+ .tx_power_on = sun50i_a100_mipi_dphy_tx_power_on,
+};
+
static const struct of_device_id sun6i_dphy_of_table[] = {
{
.compatible = "allwinner,sun6i-a31-mipi-dphy",
.data = &sun6i_a31_mipi_dphy_variant,
},
+ {
+ .compatible = "allwinner,sun50i-a100-mipi-dphy",
+ .data = &sun50i_a100_mipi_dphy_variant,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
--
2.35.1
