From: Wei Fang <wei.fang@xxxxxxx> The patches add the ability to disable the hibernation mode of AR803x PHYs. Hibernation mode defaults to enabled after hardware reset on these PHYs. If the AR803x PHYs enter hibernation mode, they will not provide any clock. For some MACs, they might need the clocks which provided by the PHYs to support their own hardware logic. So, the patches add the supoort to disable hibernation mode by adding a boolean: qca,disable-hibernation If one wished to disable hibernation mode to better match with the specifical MAC, just add this property in the phy node of DT. Wei Fang (2): dt: ar803x: Document disable-hibernation property net: phy: at803x: Add disable hibernation mode support .../devicetree/bindings/net/qca,ar803x.yaml | 6 +++++ drivers/net/phy/at803x.c | 25 +++++++++++++++++++ 2 files changed, 31 insertions(+) -- 2.25.1
